Skip to main content

Voltage Pentode or Tetrode (under 100V) ·Diode-Pentode

CV784

Receiving diode-pentode intended for radio IF amplification, detection, and control functions, with the pentode providing gain and the diode furnishing signal rectification.

Directly heatedCold cathodeCommon cathodeDissimilar
Sections
2
Base
-
Socket code
-
Base pins
-
Nominal heater
1.4 V / 50 mA

Description

Commercial-equivalent designation explicitly printed for the 1S5 miniature battery diode-pentode.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
-
Socket code
-
Base pins
-
Nominal heater voltage
1.4 V
Nominal heater current
50 mA
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

2 physical sections, each with unique specifications.

Section 1

Diode

X-ray radiationInterelectrode capacitances

No fixed ratings are recorded for this section.

Published ratings and characteristics promoted semantically from source; repeated identical physical sections compressed where applicable.

Section 2

Pentode

X-ray radiationInterelectrode capacitances
Plate resistance
600000 Ω
Transconductance
0.000625 S
Max plate voltage
90 V
Max screen voltage
90 V
Max cathode current
3 mA

Published ratings and characteristics promoted semantically from source; repeated identical physical sections compressed where applicable.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1958 Brimar Radio Valve No 7

Published operating points and test conditions from this source.

SECTION 2

Pentode

Other

  • Plate Voltage

    67.5 V

    PentodeSection

  • Plate Current

    1.6 mA

    PentodeSection

  • Screen Voltage

    67.5 V

    PentodeSection

  • Screen Current

    0.4 mA

    PentodeSection

Characteristic

  • Transconductance

    625 µS

    PentodeSection

  • Plate Resistance

    600000 ohm

    PentodeSection