Skip to main content
Tube Tinker — Electron Tube Database
Alternatives & variationsDownload PDF datasheet

Specialized - Klystron ·Klystron

CV6003

Rugged reflex klystron for local-oscillator service, intended for stable microwave generation in demanding electronic equipment.

Directly heatedCold cathodeCommon cathodeDissimilarSpecialized
Sections
1
Base
-
Socket code
-
Base pins
-
Nominal heater
6.3 V / 600 mA

Description

Rugged reflex kiystron for local oscillator service.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
-
Socket code
-
Base pins
-
Nominal heater voltage
6.3 V
Nominal heater current
600 mA
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Klystron

X-ray radiationInterelectrode capacitances

No fixed ratings are recorded for this section.

Microwave/special-function section; schema has no directly applicable promoted electrode fields; published electrical data preserved in parameters.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1971 English Electric Valve

Published operating points and test conditions from this source.

SECTION 1

Klystron

Other

  • Frequency range

    9000 MHz

    Frequency range 8500 to 9000 MHz

  • Typical output power

    45 mw

    Typical output power 45 mw

  • Electronic tuning range

    35 MHz

    Electronic tuning range 35 MHz

  • Heater voltage

    6.3

    Heater voltage 6.3 \Y

  • Heater current

    600 mA

    Heater current 0.6 A

  • Heatervoltage

    6.8

    Heatervoltage . . . . . . . . . . . b8 6.8

  • Resonatorvoltage

    400

    Resonatorvoltage . . . . . . . . . . ~— 400

  • Resonator current

    50

    Resonator current . . e e e = 50

  • Heater voltage

    63

    Heater voltage . 63

  • Resonator voltage

    350

    Resonator voltage 350

  • Load v.s.w.r

    1 v

    Load v.s.w.r. 1.1:1 max

Characteristic

  • Heater current

    620 mA

    Heater current . . . . . . 052 0.b8 0.62 A

  • Resonator current

    40 mA

    Resonator current . . . . 25 35 40 mA

  • Reflector voitage

    -265

    Reflector voitage . . . . —140 - —265 \

  • Output power

    45 mw

    Output power .. .o 30 45 mw

  • Mechanical tuning range

    9000 MHz

    Mechanical tuning range - 8500 — 9000 MHz

  • of frequency

    -325 kHz

    of frequency . . .. - — —325 kHz/°C

  • frequency pulling

    3 MHz

    frequency pulling . . . . — 3.0 MHz

  • output power

    30

    output power . . . . 20 30 mwW

  • frequency deviation

    2 MHz

    frequency deviation L. - 1.5 2.0 MHz

  • 1. Clockwise rotation of the tuner increases the frequency. The tuner torque

    1

    1. Clockwise rotation of the tuner increases the frequency. The tuner torque

  • The reflector circuit impedance must not exceed 0.5Mf£2. The reflector

    2

    . The reflector circuit impedance must not exceed 0.5Mf£2. The reflector

  • With a mismatch of v.s.w.r. 1.5: 1, varied through all phases

    1 a

    . With a mismatch of v.s.w.r. 1.5: 1, varied through all phases.

  • e—(1)——w|

    1 w

    e—(1)——w| REFLECTOR