Skip to main content

Voltage Pentode ·Pentode

CK511X

Directly heated Raytheon subminiature pentode for low-voltage battery-powered voltage amplification, typically operating near 45 V plate supply.

Directly heatedCold cathodeCommon cathodeDissimilar
Sections
1
Base
6C
Socket code
-
Base pins
6
Nominal heater
1.25 V / 50 mA

Description

CK511X is a directly heated Raytheon subminiature pentode listed for voltage amplifier service. The summary table specifies a 1.25-V, 50-mA filament and a typical 45-V plate operating point.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
6C
Socket code
-
Base pins
6
Nominal heater voltage
1.25 V
Nominal heater current
50 mA
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

6C - Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Pentode

X-ray radiationInterelectrode capacitances
Plate resistance
220000 Ω
Transconductance
0.00022 S

Published values are typical summary-table operating/characteristic data, not maximum ratings.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

195X Raytheon Special Purpose Tubes

Published operating points and test conditions from this source.

SECTION 1

Pentode

Other

  • Plate Voltage

    45 V

    Typical operating point; Voltage Amp.

  • Grid 1 Voltage

    0 V

    Typical operating point; Voltage Amp.

  • Grid 2 Voltage

    45 V

    Typical operating point; Voltage Amp.

  • Plate Current

    0.24 mA

    Typical operating point; Voltage Amp.

  • Grid 2 Current

    0.2 mA

    Typical operating point; Voltage Amp.

  • Output Power

    30 mW

    Typical operating point; Voltage Amp.

  • Load Resistance

    1 MOhm

    Typical operating point; Voltage Amp.

  • Maximum Length

    1.75 in

    Maximum dimension

  • Maximum Diameter

    0.55 in

    Maximum dimension