Skip to main content

Rectifier - Full Wave ·Rectifier-Rectifier

CK1006

Gas-filled full-wave double-diode rectifier for power supplies. Rated for approximately 1.6 kV peak inverse voltage, 200 mA DC output, and 600 mA peak current with a low conducting drop.

Directly heatedCold cathodeCommon cathodeDissimilar
Sections
2
Base
8EF
Socket code
MEDIUM4BAYONET
Base pins
-
Nominal heater
1.75 V / 2 A

Description

Gas-filled full-wave double-diode rectifier with ionically or directly heated emitter.

Socket description

Medium 4-contact bayonet base

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
8EF
Socket code
MEDIUM4BAYONET
Base pins
-
Nominal heater voltage
1.75 V
Nominal heater current
2 A
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

8EF - Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

2 physical sections, each with unique specifications.

Section 1

Rectifier

X-ray radiationInterelectrode capacitances
Rectifier peak inverse voltage
1600 V
Rectifier nominal output current
200 mA
Rectifier peak forward current
600 mA
Rectifier forward voltage drop
20 V

Promoted only from clearly identified printed ratings/characteristics; additional operating and limiting values retained in TUBE_SECTION_PARAMETER.

Section 2

Rectifier

X-ray radiationInterelectrode capacitances
Rectifier peak inverse voltage
1600 V
Rectifier nominal output current
200 mA
Rectifier peak forward current
600 mA
Rectifier forward voltage drop
20 V

Second physical rectifier section; electrical properties populated from applicable published ratings.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

195X Raytheon Special Purpose Tubes

Published operating points and test conditions from this source.

SECTION 1

Rectifier

Other

  • Peak inverse voltage maximum

    1600 V

    FullWave;Gas

  • Peak plate current per plate maximum

    600 mA

    FullWave;Gas

  • DC output current maximum

    200 mA

    FullWave;Gas

Characteristic

  • Average tube voltage drop

    20 V

    FullWave;Gas

SECTION 2

Rectifier

Other

  • Peak inverse voltage maximum

    1600 V

    FullWave;Gas

  • Peak plate current per plate maximum

    600 mA

    FullWave;Gas

  • DC output current maximum

    200 mA

    FullWave;Gas

Characteristic

  • Average tube voltage drop

    20 V

    FullWave;Gas