Skip to main content

Power - Triode (over 1000V 100W) ·Triode

CAT29

Water-cooled thoriated-tungsten transmitting triode for communications and RF-heating amplifier or oscillator service. Very high transconductance, approximately 18 kW plate dissipation, and 15 kV capability support major RF generators.

Directly heatedCold cathodeCommon cathodeDissimilar
Sections
1
Base
-
Socket code
-
Base pins
-
Nominal heater
15 V / 57 A

Description

Water-cooled thoriated-tungsten transmitting triode for communications and RF-heating amplifier/oscillator service to 40 MHz.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
-
Socket code
-
Base pins
-
Nominal heater voltage
15 V
Nominal heater current
57 A
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Triode

X-ray radiationInterelectrode capacitances
Transconductance
0.095 S
Amplification factor
45
Max plate voltage
15000 V
Max plate dissipation
18000 W
Max grid dissipation
800 W
Max cathode current
20 A

Applicable promoted ratings mapped semantically from the printed approximate-data/ratings tables; useful non-promoted operating, capacitance and service data retained in TUBE_SECTION_PARAMETER.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1955 Marconi

Published operating points and test conditions from this source.

SECTION 1

Triode

Other

  • Filament Cold Resistance

    0.0225 ohm

  • Anode Water Flow Minimum

    4.5 gal/min

  • Cooling Water Outlet Temperature Maximum

    65 C

  • Frequency Full Rating Maximum

    20 MHz

  • Frequency Reduced Rating Maximum

    40 MHz

  • Typical Plate Voltage

    12000 V

    ClassC

  • Typical Plate Voltage

    10000 V

    ClassC

  • Typical RF Output Power

    7600 W

    ClassC

  • Typical RF Output Power

    6000 W

    ClassC