Skip to main content

Power - Triode (over 1000V 100W) ·Triode

CAT27

Very-high-power water-cooled thoriated-tungsten transmitting triode for communications and RF-heating power amplifiers. Approximately 150 kW plate dissipation and 20 kV capability support enormous continuous industrial and transmitter RF power.

Directly heatedCold cathodeCommon cathodeDissimilar
Sections
1
Base
-
Socket code
-
Base pins
-
Nominal heater
17.5 V / 285 A

Description

Water-cooled thoriated-tungsten transmitting triode for communications and RF-heating power-amplifier service to 26 MHz.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
-
Socket code
-
Base pins
-
Nominal heater voltage
17.5 V
Nominal heater current
285 A
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Triode

X-ray radiationInterelectrode capacitances
Transconductance
0.05 S
Amplification factor
45
Max plate voltage
20000 V
Max plate dissipation
150000 W
Max grid dissipation
8000 W
Max cathode current
120 A

Applicable promoted ratings mapped semantically from the printed approximate-data/ratings tables; useful non-promoted operating, capacitance and service data retained in TUBE_SECTION_PARAMETER.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1955 Marconi

Published operating points and test conditions from this source.

SECTION 1

Triode

Other

  • Filament Starting Current Maximum

    375 A

  • Anode Water Flow Minimum

    20 gal/min

  • Cooling Water Outlet Temperature Maximum

    65 C

  • Frequency Full Rating Maximum

    15 MHz

  • Frequency Reduced Rating Maximum

    26 MHz

  • Anode-Grid Capacitance

    13 pF

  • Anode-Cathode Capacitance

    36 pF

  • Grid-Cathode Capacitance

    101 pF

  • Typical RF Output Power

    92000 W

    ClassC

  • Typical RF Output Power

    138000 W

    ClassC

  • Typical Plate Voltage

    14000 V

    AnodeModulated