Skip to main content

Voltage - Triode (single) ·Triode

C327

Cunningham general-purpose detector and amplifier triode for early radio receivers, with published circuit recommendations and operating characteristics.

Directly heatedCold cathodeCommon cathodeDissimilar
Sections
1
Base
-
Socket code
UX5
Base pins
-
Nominal heater
2.5 V / 1.75 A

Description

C327: Cunningham general-purpose detector/amplifier triode. The complete bulletin was read for construction, ratings, circuit recommendations, and operating characteristics.

Socket description

Small 5-contact

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
-
Socket code
UX5
Base pins
-
Nominal heater voltage
2.5 V
Nominal heater current
1.75 A
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Triode

X-ray radiationInterelectrode capacitances
Plate resistance
11000 Ω
Transconductance
0.00082 S
Amplification factor
9

Published ratings and characteristic constants promoted where applicable; operating recommendations retained as parameters.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1931 Cunningham Radio Tubes

Published operating points and test conditions from this source.

SECTION 1

Triode

Characteristics

  • Filament/heater voltage

    2.5 V

  • Filament/heater current

    1.75 A

  • Plate resistance

    11000 ohm

  • Transconductance

    820 uS

  • Amplification factor

    9