Rectifier - Full Wave ·Rectifier-Rectifier
Directly heated two-plate full-wave rectifier for conventional electronic power supplies. Its 4 V filament construction provides approximately 60 mA nominal rectified output through a dual-anode arrangement.
Directly heated two-plate full-wave rectifier for power-supply service.
General specifications
Properties common to every published source and operating point.
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
2 physical sections, each with unique specifications.
Section 1
Promoted from clearly identified published ratings/characteristics; additional operating points, capacitances, rectifier conditions, and application-specific values are retained in TUBE_SECTION_PARAMETER.
Section 2
Second physical rectifier section; promoted electrical properties populated from identical section.
Source-dependent data
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 01
Published operating points and test conditions from this source.
AC supply voltage per plate maximum
500 V RMS
FullWave
DC output current maximum
60 mA
FullWave
Maximum input capacitor
50 µF
CapacitorInputFilter
AC supply voltage per plate maximum
500 V RMS
FullWave
Data set 02
Published operating points and test conditions from this source.
AC Input Voltage
400 V
FullWave;PerPlate
Data set 03
Published operating points and test conditions from this source.
Transformer secondary voltage
2x300 V RMS
Maximum DC output current
70 mA
TransformerVoltage=2x300V
Maximum DC output current
60 mA
TransformerVoltage=2x400V
Maximum DC output current
60 mA
TransformerVoltage=2x500V
Maximum filter input capacitance
50 uF
Transformer secondary voltage
2x300 V RMS
Maximum DC output current
70 mA
TransformerVoltage=2x300V