Data set 01
195X Tunsgram
Published operating points and test conditions from this source.
SECTION 1
Diode
Other
Maximum signal voltage
200 V
Per diode, peak
Maximum diode current
0.8 mA
Per anode
Maximum heater-cathode voltage
50 V
Diode (NOT rectifier) ·Diode-Diode
AB2
The supplied sources identify AB2 as a triode rather than a dual diode, so its functional classification should follow triode construction rather than this source bucket.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 2
- Base
- V24
- Socket code
- P5
- Base pins
- 5
- Nominal heater
- 4 V / 650 mA
Description
4 V indirectly heated triode. Electrical ratings and operating characteristics were extracted from the supplied 4-volt valve data table, including the published heater data and available section-level values.
Socket description
Europe side-contact small P5
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- V24
- Socket code
- P5
- Base pins
- 5
- Nominal heater voltage
- 4 V
- Nominal heater current
- 650 mA
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
V24 - Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
2 physical sections, each with unique specifications.
Section 1
Diode
X-ray radiationInterelectrode capacitances
- Max plate voltage
- 200 V
- Max cathode current
- 0.8 mA
- Rectifier max heater-cathode voltage
- 50 V
Two electrically identical diode sections share a cathode; represented once under repeated-identical-section compression.
Section 2
Diode
X-ray radiationInterelectrode capacitances
No fixed ratings are recorded for this section.
Second physical diode section added in approved reconciliation.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 02
1999 Philips 0-D
Published operating points and test conditions from this source.
SECTION 1
Diode
Other
Signal peak voltage maximum
200 V
Rectified diode current maximum
0.8 mA
PerDiode
Heater-cathode voltage maximum
125 V