Skip to main content

Voltage - Triode (single) ·Triode

A1714

Low-noise planar triode for RF oscillator and amplifier service, characterized around 45 MHz.

Directly heatedCold cathodeCommon cathodeDissimilar
Sections
1
Base
-
Socket code
-
Base pins
7
Nominal heater
6.3 V / 490 mA

Description

The A1714 is a low-noise planar triode for radio-frequency oscillator and amplifier service, with characteristics specified around 45 MHz.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
-
Socket code
-
Base pins
7
Nominal heater voltage
6.3 V
Nominal heater current
490 mA
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Triode

X-ray radiationInterelectrode capacitances
Plate resistance
5000 Ω
Transconductance
0.0085 S
Amplification factor
45
Max plate voltage
250 V
Max plate dissipation
2.5 W
Max grid dissipation
0.1 W
Max cathode current
45 mA

Planar VHF/UHF triode.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1955 Marconi

Published operating points and test conditions from this source.

SECTION 1

Triode

Other

  • Noise factor*

    2

    Noise factor* 2 db

  • Teq noise ref gl

    500

    Teq noise ref gl 500

  • cg-k (heater earthed) [1]

    22

    cg-k (heater earthed) 22 3-6 pF

  • cg-k (heater earthed) [2]

    3

    cg-k (heater earthed) 22 3-6 pF

  • cg-k (heater earthed) [3]

    -6

    cg-k (heater earthed) 22 3-6 pF

  • Cg-all (less anode) [1]

    2

    Cg-all (less anode) 2:25 4-0 pF

  • Cg-all (less anode) [2]

    25

    Cg-all (less anode) 2:25 4-0 pF

  • Cg-all (less anode) [3]

    4

    Cg-all (less anode) 2:25 4-0 pF

  • Cg-all (less anode) [4]

    0

    Cg-all (less anode) 2:25 4-0 pF

  • Ca-k (heater earthed) [1]

    0

    Ca-k (heater earthed) 0-065 — pF

  • Ca-k (heater earthed) [2]

    -65

    Ca-k (heater earthed) 0-065 — pF

  • The circuit of fig

    1

    The circuit of fig. 1 will give good signal-to-noise ratio at frequencies of the order of

  • capacitors “ C " are of the feed-through type. For a frequency of

    500 MHz

    capacitors “ C " are of the feed-through type. For a frequency of 500 Mc/s the induct-

  • outputs at frequencies up to

    1000 MHz

    outputs at frequencies up to 1,000 Mc/s.

Data set 02

1968 General Electric Co

Published operating points and test conditions from this source.

SECTION 1

Triode

Other

  • up to

    1000 MHz

  • up to 1000 Mc/s or as a low noise amplifier at frequencies up to about

    300 MHz

  • Vh-k(pk)

    90 V

    MAXIMUM RATINGS (Design centre)

  • rin (

    45 MHz

    a subsidiary of THE GENERAL ELECTRIC CO LTD OF ENGLAND

  • cg-all (

    45 MHz

    a subsidiary of THE GENERAL ELECTRIC CO LTD OF ENGLAND

  • cg-all (45 Mc/s)

    5 pF

    a subsidiary of THE GENERAL ELECTRIC CO LTD OF ENGLAND

  • Noise factor (

    45 MHz

    a subsidiary of THE GENERAL ELECTRIC CO LTD OF ENGLAND

  • Noise factor (45 Mc/s)

    1.9 dB

    a subsidiary of THE GENERAL ELECTRIC CO LTD OF ENGLAND

Characteristic

  • ca-g

    0.9 pF

    CAPACITANCES (of unscreened valve)

  • Ca-all less g

    1.3 pF

    CAPACITANCES (of unscreened valve)

  • tCg-all less a

    3 pF

    CAPACITANCES (of unscreened valve)

  • +Measured at

    1 MHz

    CAPACITANCES (of unscreened valve)