Skip to main content
Tube Tinker — Electron Tube Database
Alternatives & variationsDownload PDF datasheet

Voltage Regulator ·VoltageRegulator

95A1

Low-current gas voltage stabilizer providing approximately 95 V over roughly 2–10 mA for compact reference and shunt-regulator circuits.

Directly heatedCold cathodeCommon cathodeDissimilar
Sections
1
Base
-
Socket code
-
Base pins
-
Nominal heater
-

Description

The Mullard 95A1 is a miniature gas-filled voltage stabilizer with an auxiliary ignition electrode.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
-
Socket code
-
Base pins
-
Nominal heater voltage
-
Nominal heater current
-
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Voltage Regulator

X-ray radiationInterelectrode capacitances
Regulator voltage
95 V
Regulator minimum current
2 mA
Regulator maximum current
10 mA
Regulator starting voltage
110 V
Regulator maintaining voltage
95 V

Voltage stabilizer discharge with priming electrode.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1963 Mullard

Published operating points and test conditions from this source.

SECTION 1

Voltage Regulator

Other

  • Minimum Ignition Voltage

    110 V

  • Maximum Burning Current

    10 mA

  • Minimum Burning Current

    2 mA

    OCR source reads 20mA but characteristic range specifies 2-10mA

  • Maximum Auxiliary Anode Current

    0.5 mA

Characteristics

  • Maximum Auxiliary Anode Ignition Voltage

    150 V

  • Burning Voltage Minimum

    90 V

  • Burning Voltage Maximum

    100 V

  • Maximum Burning Voltage Range

    5 V

    CurrentRange=2-10mA