Alternatives & variations Download PDF datasheet

Voltage Radio Detector Converter ·Rectifier

9006

Miniature UHF diode for rectifier, detector, and measuring service. Its compact construction and roughly 700 MHz resonance suit specialized high-frequency detection and measurement circuits.

Directly heatedCold cathodeCommon cathodeDissimilar

Sections: 1
Base: 6BH
Socket code: B7G
Base pins: 7
Nominal heater: 6.3 V / 150 mA

Description

Seven-pin miniature UHF diode for rectifier, detector, or measuring service; resonant frequency about 700 MHz.

Socket description

Miniature 7-contact

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base: 6BH
Socket code: B7G
Base pins: 7
Nominal heater voltage: 6.3 V
Nominal heater current: 150 mA
Parallel heater voltage: -
Parallel heater current: -
Series capable: No

6BH - Terminal pinout

Electrical assignments shared by every tube using this base designation.

Terminal	Section	Connection	Evidence
PIN1P	A	P — Plate (Anode) Chart transcription; manufacturer cross-check pending	Unverified EIA Base Connections, printed page 127, 6BH
PIN2K	A	K — Cathode Chart transcription; manufacturer cross-check pending	Unverified EIA Base Connections, printed page 127, 6BH
PIN3H	—	H — Heater Chart transcription; manufacturer cross-check pending	Unverified EIA Base Connections, printed page 127, 6BH
PIN4H	—	H — Heater Chart transcription; manufacturer cross-check pending	Unverified EIA Base Connections, printed page 127, 6BH
PIN5P	A	P — Plate (Anode) Chart transcription; manufacturer cross-check pending	Unverified EIA Base Connections, printed page 127, 6BH
PIN7K	A	K — Cathode Chart transcription; manufacturer cross-check pending	Unverified EIA Base Connections, printed page 127, 6BH

Section ratings

1 physical section, each with unique specifications.

Section 1

Rectifier

X-ray radiationInterelectrode capacitances

Rectifier peak inverse voltage: 750 V
Rectifier nominal output current: 5 mA
Rectifier peak forward current: 15 mA
Rectifier max heater-cathode voltage: 100 V

Detector diode with rectifier-style peak inverse/current ratings.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

195X General Electric Essential Characteristics

Published operating points and test conditions from this source.

SECTION 1

Rectifier

Characteristic

Heater/filament voltage
6.3 V
Published heater/filament rating
Heater/filament current
150 mA
Published heater/filament rating

Other

DC output current
5 mA
RectifierService
Peak inverse voltage
750 V
RectifierService
RMS supply voltage per plate
270 V
RectifierService
Peak current per plate
15 mA
RectifierService

Data set 02

195X Raytheon Special Purpose Tubes

Published operating points and test conditions from this source.

SECTION 1

Rectifier

Other

Peak inverse voltage maximum
750 V
Detector;EachSection
Maximum DC output current
5 mA
Detector;EachSection

Data set 03

1960 RCA Industrial and Communications Types

Published operating points and test conditions from this source.

SECTION 1

Rectifier

Characteristic

HeaterOrFilamentVoltage
6.3 V
HeaterOrFilamentCurrent
150 mA
MaximumOperatingFrequency
700 MHz
Approximate/useful limit
Resonant Frequency
700 MHz

Other

Peak Inverse Voltage
750 V
DCOutputCurrentMaximum
5 mA

Data set 04

1961 Tung Sol

Published operating points and test conditions from this source.

SECTION 1

Rectifier

Other

Heater voltage
6.3 V
Heater current
150 mA
AC plate supply voltage RMS
270 V
Minimum effective plate supply impedance
100 ohm

Capacitance

Plate-to-cathode capacitance
1.4 pF

Characteristic

Resonant frequency approximate
700 MHz

Data set 05

1971 RCA HB3 Binder 3 of 7

Published operating points and test conditions from this source.

SECTION 1

Rectifier

Other

Heater voltage
6.3 V
Nominal
Heater current
150 mA
Nominal
Peak inverse plate voltage
750 V
Rectifier
Peak plate current
15 mA
Rectifier
DC output current
5 mA
Rectifier
DC heater-cathode potential
100 V
Rectifier
AC plate supply voltage RMS
270 V
Rectifier
Minimum total effective plate-supply impedance
100 ohm
Rectifier
DC output current
5 mA
Rectifier

Capacitance

Plate-to-cathode capacitance
1.4 pF
No external shield
Plate-to-heater capacitance
0.2 pF
No external shield
Cathode-to-heater capacitance
2.2 pF
No external shield

Characteristic

Resonant frequency
700 MHz
Approximate