Skip to main content
Tube Tinker — Electron Tube Database
Alternatives & variationsDownload PDF datasheet

Rectifier - Full Wave ·Rectifier-Rectifier

84624

Brimar 84/624 two-anode full-wave rectifier.

Directly heatedCold cathodeCommon cathodeDissimilar
Sections
2
Base
-
Socket code
-
Base pins
-
Nominal heater
6.3 V / 500 mA

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
-
Socket code
-
Base pins
-
Nominal heater voltage
6.3 V
Nominal heater current
500 mA
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

2 physical sections, each with unique specifications.

Section 0

Rectifier

X-ray radiationInterelectrode capacitances

No fixed ratings are recorded for this section.

Rectifier anode 1; maximum RMS input per anode 325 V; total rectified output 60 mA.

Section 1

Rectifier

X-ray radiationInterelectrode capacitances

No fixed ratings are recorded for this section.

Rectifier anode 2; shares cathode/heater, same maximum RMS input per anode 325 V.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1948 Brimar Radio Valve Manual

Published operating points and test conditions from this source.

SECTION 0

Rectifier

Other

  • Heater/filament voltage

    6.3 V

    Common heater voltage

  • Heater/filament current

    500 mA

    Common heater current

  • Average plate current

    60 mA

    Maximum total rectified output current