Data set 01
1950 General Electric Transmitting Types
Published operating points and test conditions from this source.
SECTION 1
Triode
Characteristic
HeaterOrFilamentVoltage
10 V
HeaterOrFilamentCurrent
3.25 A
Other
FrequencyForMaximumRatings
20 MHz
Power - Triode ·Triode
835
Thoriated-tungsten transmitting triode for AF power/modulator and RF amplifier/oscillator service, with 75-watt maximum plate dissipation.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 1
- Base
- -
- Socket code
- UX4
- Base pins
- 4
- Nominal heater
- 10 V / 3.25 A
Description
Thoriated-tungsten transmitting triode for AF power/modulator and RF amplifier/oscillator service.
Socket description
Medium-shell UX 4-contact
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- UX4
- Base pins
- 4
- Nominal heater voltage
- 10 V
- Nominal heater current
- 3.25 A
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
1 physical section, each with unique specifications.
Section 1
Triode
X-ray radiationInterelectrode capacitances
- Transconductance
- 0.0036 S
- Amplification factor
- 12
- Max plate voltage
- 1250 V
- Max plate dissipation
- 75 W
Electrical section extracted from supplied RCA data sheet. Reference-only limitations noted in TUBE.Notes.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 02
1956 RCA Transmitting Tubes
Published operating points and test conditions from this source.
SECTION 1
Triode
Characteristic
HeaterOrFilamentVoltage
10 V
HeaterOrFilamentCurrent
3.25 A
Other
MaximumOperatingFrequency
100 MHz
Reduced ratings may apply at upper frequencies
Data set 03
1971 RCA HB3 Binder 6 of 7
Published operating points and test conditions from this source.
SECTION 1
Triode
Characteristic
Heater/filament voltage nominal
10 V
WholeTube
Other
Voltage
10 A
Published source row
Current
3
Published source row
Current (value 2)
5
Published source row
Grid to Filament ~` ^
6
Published source row
~> ~ ~ ~
1
Published source row
Voltage
2.5 A
Published source row
A '
2 A
Published source row
A ' (value 2)
5 A
Published source row
Peak Inverse Plate Voltage
5000 V
Published source row
Peak Plate Current
1 A
Published source row
Average Plate Current
250 mA
Published source row
Maximum plate voltage
5000 V
Promoted field corroboration