Alternatives & variations Download PDF datasheet

8094199

Machlett high-vacuum high-voltage rectifier and hold-off diode for demanding pulse and power supplies. Its massive filament, roughly 110 kV inverse-voltage capability, and strong peak current suit specialized high-power systems.

Directly heatedCold cathodeCommon cathodeDissimilar

Sections: 1
Base: -
Socket code: -
Base pins: -
Nominal heater: 12 V / 23 A

Description

High-vacuum high-voltage rectifier / hold-off diode; printed type ML-8094/199.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base: -
Socket code: -
Base pins: -
Nominal heater voltage: 12 V
Nominal heater current: 23 A
Parallel heater voltage: -
Parallel heater current: -
Series capable: No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Rectifier

X-ray radiationInterelectrode capacitances

Max plate dissipation: 1500 W
Rectifier peak inverse voltage: 110000 V
Rectifier peak forward current: 10 A
Rectifier warm-up time: 30 s

Applicable promoted ratings populated from printed headings; remaining published device-specific data retained as parameters.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1971 Machlette Laboratories

Published operating points and test conditions from this source.

SECTION 1

Rectifier

Other

Average DC Load Current Single Phase Half Wave
1.3 A
Unfiltered
Average DC Load Current Three Phase Double-Y
7 A
Unfiltered
Average DC Load Current Three Phase Double-Y Filtered
7.2 A
ChokeInputFilter