Data set 01
1950 General Electric Transmitting Types
Published operating points and test conditions from this source.
SECTION 1
Triode
Other
UHF oscillator frequency typical
450 MHz
OscillatorService
Voltage - Triode (single high frequency) ·Triode
8082
Metal-ceramic high-mu planar triode designed primarily for UHF oscillator service.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 1
- Base
- -
- Socket code
- -
- Base pins
- -
- Nominal heater
- 6.3 V / 240 mA
Description
Metal-ceramic high-mu planar triode primarily for UHF oscillator service.
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- -
- Base pins
- -
- Nominal heater voltage
- 6.3 V
- Nominal heater current
- 240 mA
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
1 physical section, each with unique specifications.
Section 1
Triode
X-ray radiationInterelectrode capacitances
- Transconductance
- 0.0115 S
- Amplification factor
- 90
- Max plate voltage
- 250 V
- Max plate dissipation
- 1 W
- Max cathode current
- 11 mA
Promoted fields mapped by printed headings; additional data retained in parameters.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 02
1968 General Electric Co
Published operating points and test conditions from this source.
SECTION 1
Triode
Other
Heater Voltage, AG or DC+ 6.3
0.3 V
Published datasheet line; semantic text-layer recovery
Heater Current#
240 mA
Published datasheet line; semantic text-layer recovery
Grid to Plate: (g to p)
1.3 pF
Published datasheet line; semantic text-layer recovery
Grid to Heater and Cathode: g to (h + k)
1.8 pF
Published datasheet line; semantic text-layer recovery
Heater to Cathode: (h to k)
1.5 pF
Published datasheet line; semantic text-layer recovery
Plate .Dissipation 0
1 W
Published datasheet line; semantic text-layer recovery
Peak Cathode Current ' ;
40 mA
Published datasheet line; semantic text-layer recovery
Cathode-Bias Resistor
82 Ohm
Published datasheet line; semantic text-layer recovery
Plate Current ' 9.0
7.5 mA
Published datasheet line; semantic text-layer recovery
Plate Voltage ' ' '
150 V
Published datasheet line; semantic text-layer recovery
Grid Resistor '
7000 Ohm
Published datasheet line; semantic text-layer recovery
Plate Current ) " o
4 mA
Published datasheet line; semantic text-layer recovery
Frequency ‘
450 MHz
Published datasheet line; semantic text-layer recovery
Grid Currewt
0.5 mA
Published datasheet line; semantic text-layer recovery
fieater current of a bogey_tubé at Ef =
6.3 V
Published datasheet line; semantic text-layer recovery
tube, turned
90 deg
Published datasheet line; semantic text-layer recovery
Characteristic
Grid-Circuit Resistance '
-10000 Ohm
Published datasheet line; semantic text-layer recovery
Transconductance : : . 11500
10500 uS
Published datasheet line; semantic text-layer recovery