Alternatives & variations Download PDF datasheet

7360

Beam-deflection tube designed for balanced modulation, demodulation, mixing, and frequency conversion at frequencies extending to approximately 100 MHz.

Directly heatedCold cathodeCommon cathodeDissimilarSpecialized

Sections: 1
Base: -
Socket code: B9A
Base pins: -
Nominal heater: 6.3 V / 350 mA

Description

Beam-deflection tube for balanced modulator, demodulator, mixer, and frequency-converter service to about 100 MHz.

Socket description

Small-button Noval 9-contact

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base: -
Socket code: B9A
Base pins: -
Nominal heater voltage: 6.3 V
Nominal heater current: 350 mA
Parallel heater voltage: -
Parallel heater current: -
Series capable: No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Other

X-ray radiationInterelectrode capacitances

Transconductance: 0.0054 S
Max plate voltage: 300 V
Max screen voltage: 250 V
Max plate dissipation: 3 W
Max screen dissipation: 0.5 W
Max cathode current: 12 mA

Beam-deflection section with two plates and two deflecting electrodes.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1960 RCA Industrial and Communications Types

Published operating points and test conditions from this source.

SECTION 1

Other

Application

Application
Balanced modulator / demodulator / mixer / frequency converter

Other

Maximum useful frequency
100 MHz
Balanced mixer load impedance
10000 ohm
Balanced modulator load impedance
5000 ohm

Characteristics

Balanced modulator output
4 Vpp
PushPull
Balanced mixer output
40 Vpp
PushPull

Data set 02

1971 RCA HB3 Binder 3 of 7

Published operating points and test conditions from this source.

SECTION 1

Other

Heater voltage
6.3 V
Heater current
350 mA
Plate No.1 supply voltage
150 V
ClassA
Plate No.2 supply voltage
150 V
ClassA
Deflecting-electrode supply voltage
25 V
EachDeflector
Screen supply voltage
175 V
ClassA
Total beam current
8.5 mA
ClassA
Screen current
2.1 mA
ClassA
Maximum plate voltage each
300 V
Maximum deflecting-electrode voltage
100 V
BothPolarities
Carrier suppression
60 dB
BalancedModulator
Third-order distortion
-47 dB
BalancedModulator

Characteristic

Control-grid to both plates transconductance
5400 uS
Deflecting-electrode transconductance
800 uS
Plate1
Switching voltage
11 V