7092

Radiation-cooled industrial power triode for RF oscillator and amplifier service.

Directly heatedCold cathodeCommon cathodeDissimilar

Sections: 1
Base: -
Socket code: -
Base pins: -
Nominal heater: 6.3 V / 32.5 A

Description

7092 is listed in the supplied Amperex material as a radiation-cooled industrial oscillator/amplifier triode. Published electrical ratings and operating data were captured from the supplied table.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base: -
Socket code: -
Base pins: -
Nominal heater voltage: 6.3 V
Nominal heater current: 32.5 A
Parallel heater voltage: -
Parallel heater current: -
Series capable: No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Triode

X-ray radiationInterelectrode capacitances

Transconductance: 0.0050999999999999995 S
Amplification factor: 22
Max plate voltage: 7000 V
Max plate dissipation: 800 W

Maximum ratings kept separate from typical operating characteristics; fixed fields use published maximum-rating values where clearly applicable.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1953 Amperex

Published operating points and test conditions from this source.

SECTION 1

Triode

Other

Heater/Filament Voltage
6.3 V
Heater/Filament Current
32.5 A
Maximum Plate Voltage
7000 V
Maximum Plate Dissipation
800 W

Characteristics

Transconductance
5100 uS
Amplification Factor
22

Data set 02

1963 Amperex Condensed

Published operating points and test conditions from this source.

SECTION 1

Triode

Characteristic

Heater/filament voltage
6.3 V
Published rating
Heater/filament current
32.5 A
Published rating
Amplification factor
22
TransmittingService

Other

Maximum plate dissipation
800 W
TransmittingService
Plate voltage
6000 V
TransmittingService
Plate current
600 mA
TransmittingService
Power output
2840 W
TransmittingService
Grid bias
-450 V
TransmittingService
Grid current
150 mA
TransmittingService
Maximum frequency
50 MHz
FullInputWatts

Data set 03

1963 Siemens

Published operating points and test conditions from this source.

SECTION 1

Triode

Capacitance

Cgk
9.1 pF
Cak
0.25 pF
Cga
6.2 pF