Skip to main content
Tube Tinker — Electron Tube Database
Alternatives & variationsDownload PDF datasheet

Voltage Pentode - Sharp Cutoff (single) ·Pentode

6Z1PEV

Sharp-cutoff pentode designed for RF, IF, wide-band, or high-frequency voltage-amplifier service.

Directly heatedCold cathodeCommon cathodeDissimilar
Sections
1
Base
B7G
Socket code
B7G
Base pins
7
Nominal heater
6.3 V / 172 mA

Description

The 6XIII-EB high-frequency short-characteristic ctukoi 6XKIII-EB npennasHaueH s yCuieHWs Hanps- pentode has been designed for h.

Socket description

Miniature 7-contact

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
B7G
Socket code
B7G
Base pins
7
Nominal heater voltage
6.3 V
Nominal heater current
172 mA
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

B7G - Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Pentode

X-ray radiationInterelectrode capacitances
Transconductance
0.00515 S
Max plate voltage
120 V

English specification/electrical-characteristics text used as primary source; Russian only as corroboration/fallback.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

195X Russian

Published operating points and test conditions from this source.

SECTION 1

Pentode

Characteristic

  • Heater voltage

    6.3 V

    Published heater condition.

  • Heater current

    172 mA

    Published heater current.

  • Transconductance

    5150 µS

    Published characteristic; normalized to µS.

Other

  • Maximum plate voltage

    120 V

    Published limiting/specification value.