6Z11PE

Sharp-cutoff pentode designed for RF, IF, wide-band, or high-frequency voltage-amplifier service.

Directly heatedCold cathodeCommon cathodeDissimilar

Sections: 1
Base: B9A
Socket code: -
Base pins: 9
Nominal heater: 6.3 V / 440 mA

Description

The 6XIIM-E high-frequency short-characteristic craxoit 6)K111I-E npensasnayed Ijid YCHIEHHS Hamps- pentode has been designed for voitage amplification in KEHAA B IUHPOKOMOJIOCHBIX YCHIIHTENSAX.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base: B9A
Socket code: -
Base pins: 9
Nominal heater voltage: 6.3 V
Nominal heater current: 440 mA
Parallel heater voltage: -
Parallel heater current: -
Series capable: No

B9A - Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Pentode

X-ray radiationInterelectrode capacitances

Transconductance: 0.028 S
Max plate voltage: 150 V
Max screen voltage: 150 V
Max plate dissipation: 4.9 W
Max screen dissipation: 1.15 W
Max cathode current: 40 mA

English specification/electrical-characteristics text used as primary source; Russian only as corroboration/fallback.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

195X Russian

Published operating points and test conditions from this source.

SECTION 1

Pentode

Characteristic

Heater voltage
6.3 V
Published heater condition.
Heater current
440 mA
Published heater current.
Transconductance
28000 µS
Published characteristic; normalized to µS.

Other

Maximum plate voltage
150 V
Published limiting/specification value.