6Z10P

Russian dual-control high-frequency pentode designed for wideband amplifiers, using two control grids for added signal-control flexibility.

Directly heatedCold cathodeCommon cathodeDissimilar

Sections: 1
Base: B9A
Socket code: -
Base pins: 9
Nominal heater: 6.3 V / 300 mA

Description

The 62K10I1 high-frequency pentode with two control aitem 6JK10I1 npemHa3nayeH AN UCMONL3OBAHHA B LUM- grids has been designed for use in wide-band ampli fiers POKONOMOCHBIX YCHJIKTEISAX B PaAMOTEXHHYECKHX YCT- of electronic devices.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base: B9A
Socket code: -
Base pins: 9
Nominal heater voltage: 6.3 V
Nominal heater current: 300 mA
Parallel heater voltage: -
Parallel heater current: -
Series capable: No

B9A - Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Pentode

X-ray radiationInterelectrode capacitances

Transconductance: 0.01 S
Max plate voltage: 250 V
Max screen voltage: 120 V
Max plate dissipation: 3 W
Max screen dissipation: 0.75 W
Max cathode current: 35 mA

English specification/electrical-characteristics text used as primary source; Russian only as corroboration/fallback.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

195X Russian

Published operating points and test conditions from this source.

SECTION 1

Pentode

Characteristic

Heater voltage
6.3 V
Published heater condition.
Heater current
300 mA
Published heater current.
Transconductance
10000 µS
Published characteristic; normalized to µS.

Other

Maximum plate voltage
200 V
Published limiting/specification value.