Data set 01
1959 Rogers
Published operating points and test conditions from this source.
SECTION 1
Pentode
Application
Application
High-transconductance RF amplifier
Voltage Pentode - Sharp Cutoff (single) ·Pentode
6T6GM
High-transconductance RF pentode developed for fixed-gain high-frequency amplifier service with substantial signal capability.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 1
- Base
- -
- Socket code
- IO
- Base pins
- 8
- Nominal heater
- 6.3 V / 450 mA
Description
High-transconductance RF pentode.
Socket description
International Octal
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- IO
- Base pins
- 8
- Nominal heater voltage
- 6.3 V
- Nominal heater current
- 450 mA
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
1 physical section, each with unique specifications.
Section 1
Pentode
X-ray radiationInterelectrode capacitances
- Transconductance
- 0.0055 S
- Max plate voltage
- 300 V
- Max screen voltage
- 200 V
- Max plate dissipation
- 4 W
- Max screen dissipation
- 0.4 W
Published Rogers/JETEC/RMA ratings and characteristics promoted where applicable; additional data retained as parameters.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.