Tube cross-reference
6SH7GT alternatives, equivalents, and replacements
Review exact electrical variations and directional substitutions recorded for the 6SH7GT voltage pentode - sharp cutoff (single). Compare core specifications and verify every restriction before using a replacement.
Exact variations of 6SH7GT
These designations belong to the same electrical variation group. Their names may differ because of international standards, manufacturing tolerances, or materials, but they are recorded as electrically equivalent—not merely substitutes.
6SH7L Voltage Pentode - Sharp Cutoff (single)
- Base
- Not recorded
- Socket
- IO
- Base pins
- 8
- Sections
- 1
- Heater voltage
- 6.3 V
- Heater current
- 0.3 A
Replacement tubes for 6SH7GT
The following tubes are recorded as possible replacements for 6SH7GT. This direction does not establish that 6SH7GT can replace them.
Voltage Pentode - Remote Cutoff (single)
The database records 6AB7 as a possible replacement for6SH7GT.
- Parallel heater circuits only
- Not suitable for all circuits
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode - Sharp Cutoff (single) | Voltage Pentode - Remote Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 8BK | 8N |
| Socket | IO | IO |
| Base pins | 8 | 8 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.3 A | 0.45 A |
Voltage Pentode - Sharp Cutoff (single)
The database records 6AC7 as a possible replacement for6SH7GT.
- Parallel heater circuits only
- Not suitable for all circuits
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode - Sharp Cutoff (single) | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 8BK | 8N |
| Socket | IO | IO |
| Base pins | 8 | 8 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.3 A | 0.45 A |
Voltage Pentode - Sharp Cutoff (single)
The database records 6AJ7 as a possible replacement for6SH7GT.
- Parallel heater circuits only
- Not suitable for all circuits
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode - Sharp Cutoff (single) | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 8BK | 8N |
| Socket | IO | IO |
| Base pins | 8 | 8 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.3 A | 0.45 A |
Voltage Pentode - Remote Cutoff (single)
The database records 6SG7 as a possible replacement for6SH7GT.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode - Sharp Cutoff (single) | Voltage Pentode - Remote Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 8BK | RTMA 8BK |
| Socket | IO | IO |
| Base pins | 8 | 8 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.3 A | 0.3 A |
Voltage Pentode - Remote Cutoff (single)
The database records 6SG7GT as a possible replacement for6SH7GT.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode - Sharp Cutoff (single) | Voltage Pentode - Remote Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 8BK | 8BK |
| Socket | IO | IO |
| Base pins | 8 | 8 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.3 A | 0.3 A |
Voltage Pentode - Sharp Cutoff (single)
The database records 6SH7 as a possible replacement for6SH7GT.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode - Sharp Cutoff (single) | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 8BK | RMA 8BK |
| Socket | IO | IO |
| Base pins | 8 | 8 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.3 A | 0.3 A |
Voltage Pentode - Sharp Cutoff (single)
The database records 6SH7L as a possible replacement for6SH7GT.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode - Sharp Cutoff (single) | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 8BK | Not recorded |
| Socket | IO | IO |
| Base pins | 8 | 8 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.3 A | 0.3 A |
Where 6SH7GT can be used as the replacement
In these recorded relationships, 6SH7GT is the replacement tube. The listed original tubes are not automatically suitable as replacements for 6SH7GT.
Voltage Pentode - Remote Cutoff (single)
The database records 6SH7GT as a possible replacement for6AB7.
- Parallel heater circuits only
| Specification | 6SH7GT replacement | Original tube |
|---|---|---|
| Tube type | Voltage Pentode - Sharp Cutoff (single) | Voltage Pentode - Remote Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 8BK | 8N |
| Socket | IO | IO |
| Base pins | 8 | 8 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.3 A | 0.45 A |
Voltage Pentode - Sharp Cutoff (single)
The database records 6SH7GT as a possible replacement for6AC7.
- Parallel heater circuits only
- Not suitable for all circuits
| Specification | 6SH7GT replacement | Original tube |
|---|---|---|
| Tube type | Voltage Pentode - Sharp Cutoff (single) | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 8BK | 8N |
| Socket | IO | IO |
| Base pins | 8 | 8 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.3 A | 0.45 A |
Voltage Pentode - Sharp Cutoff (single)
The database records 6SH7GT as a possible replacement for6AJ7.
- Parallel heater circuits only
- Not suitable for all circuits
| Specification | 6SH7GT replacement | Original tube |
|---|---|---|
| Tube type | Voltage Pentode - Sharp Cutoff (single) | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 8BK | 8N |
| Socket | IO | IO |
| Base pins | 8 | 8 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.3 A | 0.45 A |
Voltage Pentode - Remote Cutoff (single)
The database records 6SH7GT as a possible replacement for6SG7.
No special restrictions are recorded for this substitution.
| Specification | 6SH7GT replacement | Original tube |
|---|---|---|
| Tube type | Voltage Pentode - Sharp Cutoff (single) | Voltage Pentode - Remote Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 8BK | RTMA 8BK |
| Socket | IO | IO |
| Base pins | 8 | 8 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.3 A | 0.3 A |
Voltage Pentode - Remote Cutoff (single)
The database records 6SH7GT as a possible replacement for6SG7GT.
No special restrictions are recorded for this substitution.
| Specification | 6SH7GT replacement | Original tube |
|---|---|---|
| Tube type | Voltage Pentode - Sharp Cutoff (single) | Voltage Pentode - Remote Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 8BK | 8BK |
| Socket | IO | IO |
| Base pins | 8 | 8 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.3 A | 0.3 A |
Voltage Pentode - Sharp Cutoff (single)
The database records 6SH7GT as a possible replacement for6SH7.
No special restrictions are recorded for this substitution.
| Specification | 6SH7GT replacement | Original tube |
|---|---|---|
| Tube type | Voltage Pentode - Sharp Cutoff (single) | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 8BK | RMA 8BK |
| Socket | IO | IO |
| Base pins | 8 | 8 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.3 A | 0.3 A |
Voltage Pentode - Sharp Cutoff (single)
The database records 6SH7GT as a possible replacement for6SH7L.
No special restrictions are recorded for this substitution.
| Specification | 6SH7GT replacement | Original tube |
|---|---|---|
| Tube type | Voltage Pentode - Sharp Cutoff (single) | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 8BK | Not recorded |
| Socket | IO | IO |
| Base pins | 8 | 8 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.3 A | 0.3 A |
Verify before substituting
Matching a base or heater voltage is not enough to prove that two tubes are interchangeable. Check pin connections, heater current, maximum ratings, bias requirements, warm-up behavior, and the equipment manufacturer’s service documentation before making a substitution.
View the complete 6SH7GT specifications →