Tube cross-reference
6S7 alternatives, equivalents, and replacements
Review exact electrical variations and directional substitutions recorded for the 6S7 voltage pentode - remote cutoff (single). Compare core specifications and verify every restriction before using a replacement.
Replacement tubes for 6S7
The following tubes are recorded as possible replacements for 6S7. This direction does not establish that 6S7 can replace them.
Voltage Pentode - Remote Cutoff (single)
The database records 6K7 as a possible replacement for6S7.
- Parallel heater circuits only
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode - Remote Cutoff (single) | Voltage Pentode - Remote Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | Not recorded | 7R |
| Socket | IO | IO |
| Base pins | 7 | 8 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.15 A | 0.3 A |
Voltage Pentode - Remote Cutoff (single)
The database records 6K7G as a possible replacement for6S7.
- Parallel heater circuits only
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode - Remote Cutoff (single) | Voltage Pentode - Remote Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | Not recorded | 7R |
| Socket | IO | IO |
| Base pins | 7 | 8 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.15 A | 0.3 A |
Voltage Pentode - Remote Cutoff (single)
The database records 6K7GT as a possible replacement for6S7.
- Parallel heater circuits only
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode - Remote Cutoff (single) | Voltage Pentode - Remote Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | Not recorded | 7R |
| Socket | IO | IO |
| Base pins | 7 | 8 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.15 A | 0.3 A |
Voltage Pentode - Remote Cutoff (single)
The database records 6S7G as a possible replacement for6S7.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode - Remote Cutoff (single) | Voltage Pentode - Remote Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | Not recorded | 7 |
| Socket | IO | IO |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.15 A | 0.15 A |
Where 6S7 can be used as the replacement
In these recorded relationships, 6S7 is the replacement tube. The listed original tubes are not automatically suitable as replacements for 6S7.
Voltage Pentode - Remote Cutoff (single)
The database records 6S7 as a possible replacement for6S7G.
No special restrictions are recorded for this substitution.
| Specification | 6S7 replacement | Original tube |
|---|---|---|
| Tube type | Voltage Pentode - Remote Cutoff (single) | Voltage Pentode - Remote Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | Not recorded | 7 |
| Socket | IO | IO |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.15 A | 0.15 A |
Voltage Pentode - Remote Cutoff (single)
The database records 6S7 as a possible replacement for6U7G.
- Parallel heater circuits only
| Specification | 6S7 replacement | Original tube |
|---|---|---|
| Tube type | Voltage Pentode - Remote Cutoff (single) | Voltage Pentode - Remote Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | Not recorded | 7R |
| Socket | IO | Not recorded |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.15 A | 0.3 A |
Verify before substituting
Matching a base or heater voltage is not enough to prove that two tubes are interchangeable. Check pin connections, heater current, maximum ratings, bias requirements, warm-up behavior, and the equipment manufacturer’s service documentation before making a substitution.
View the complete 6S7 specifications →