Tube cross-reference
6P9 alternatives, equivalents, and replacements
Review exact electrical variations and directional substitutions recorded for the 6P9 power - pentode single (not beam) (under 10w). Compare core specifications and verify every restriction before using a replacement.
Replacement tubes for 6P9
The following tubes are recorded as possible replacements for 6P9. This direction does not establish that 6P9 can replace them.
Power - Pentode Single (NOT beam) (under 10W)
The database records 6BM5 as a possible replacement for6P9.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Power - Pentode Single (NOT beam) (under 10W) | Power - Pentode Single (NOT beam) (under 10W) |
| Construction | Pentode | Pentode |
| Base | Not recorded | 7BZ |
| Socket | B9A | B9A |
| Base pins | 9 | 9 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.78 A | 0.45 A |
Where 6P9 can be used as the replacement
In these recorded relationships, 6P9 is the replacement tube. The listed original tubes are not automatically suitable as replacements for 6P9.
Power - Pentode Single (NOT beam) (under 10W)
The database records 6P9 as a possible replacement for6BM5.
No special restrictions are recorded for this substitution.
| Specification | 6P9 replacement | Original tube |
|---|---|---|
| Tube type | Power - Pentode Single (NOT beam) (under 10W) | Power - Pentode Single (NOT beam) (under 10W) |
| Construction | Pentode | Pentode |
| Base | Not recorded | 7BZ |
| Socket | B9A | B9A |
| Base pins | 9 | 9 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.78 A | 0.45 A |
Power - Beam (NOT sweep)
The database records 6P9 as a possible replacement for6HG5.
No special restrictions are recorded for this substitution.
| Specification | 6P9 replacement | Original tube |
|---|---|---|
| Tube type | Power - Pentode Single (NOT beam) (under 10W) | Power - Beam (NOT sweep) |
| Construction | Pentode | BeamPower |
| Base | Not recorded | Not recorded |
| Socket | B9A | B7G |
| Base pins | 9 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.78 A | 0.45 A |
Verify before substituting
Matching a base or heater voltage is not enough to prove that two tubes are interchangeable. Check pin connections, heater current, maximum ratings, bias requirements, warm-up behavior, and the equipment manufacturer’s service documentation before making a substitution.
View the complete 6P9 specifications →