Data set 01
198X Shuguang
Published operating points and test conditions from this source.
SECTION 1
Triode
Characteristics
Heater voltage
6.3 V
Nominal
Heater current
600 mA
Nominal
Plate voltage
250 V
Published principal electrical parameter
Voltage - Dual Triode (similar) ·Triode-Triode
6N1
Shuguang 6N1 indirectly heated dual triode for low-frequency voltage amplification, 6.3 V 600 mA heater and 35 amplification factor.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 2
- Base
- -
- Socket code
- -
- Base pins
- -
- Nominal heater
- 6.3 V / 600 mA
Description
Indirectly heated oxide-cathode dual triode intended for low-frequency voltage amplification.
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- -
- Base pins
- -
- Nominal heater voltage
- 6.3 V
- Nominal heater current
- 600 mA
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
2 physical sections, each with unique specifications.
Section 1
Triode
X-ray radiationInterelectrode capacitances
- Transconductance
- 0.00455 S
- Amplification factor
- 35
- Max plate voltage
- 300 V
- Max plate dissipation
- 2.2 W
- Max cathode current
- 25 mA
Shuguang 6N1 physical triode section 1. Heater total 6.3 V 0.6 A. Max plate 300 V, dissipation 2.2 W, cathode current 25 mA, heater-cathode ±250 V, grid resistor 1 MΩ. Typical Va 250 V, Ia 7.5±1.7 mA, Rk 600 Ω, gm 0.00455±0.00075 A/V, mu 35±7. Output C 1.75±0.35 pF, transfer C 1.85±0.85, interplate 0.075 pF, Chk <=5.6 pF.
Section 2
Triode
X-ray radiationInterelectrode capacitances
- Transconductance
- 0.00455 S
- Amplification factor
- 35
- Max plate voltage
- 300 V
- Max plate dissipation
- 2.2 W
- Max cathode current
- 25 mA
Shuguang 6N1 physical triode section 2. Heater total 6.3 V 0.6 A. Max plate 300 V, dissipation 2.2 W, cathode current 25 mA, heater-cathode ±250 V, grid resistor 1 MΩ. Typical Va 250 V, Ia 7.5±1.7 mA, Rk 600 Ω, gm 0.00455±0.00075 A/V, mu 35±7. Output C 1.95±0.85 pF, transfer C 1.85±0.85, interplate 0.075 pF, Chk <=5.6 pF.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.