Data set 01
9999 Mixed G 1000
Published operating points and test conditions from this source.
SECTION 1
Pentode
Characteristics
Plate Voltage
250 V
Voltage Pentode - Remote Cutoff (single) ·Pentode
6M7G
The 6M7G is a remote-cutoff radio-frequency pentode with a metallized glass envelope, designed for variable-gain RF and intermediate-frequency amplification. Its indirectly heated cathode, 6.3-volt heater, and remote-cutoff characteristic make it suitable for receiver stages employing automatic gain control.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 1
- Base
- -
- Socket code
- -
- Base pins
- -
- Nominal heater
- 6.3 V / 300 mA
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- -
- Base pins
- -
- Nominal heater voltage
- 6.3 V
- Nominal heater current
- 300 mA
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
1 physical section, each with unique specifications.
Section 1
Pentode
X-ray radiationInterelectrode capacitances
- Plate resistance
- 1500000 Ω
- Transconductance
- 0.0028 S
- Max plate voltage
- 250 V
- Max screen voltage
- 125 V
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.