Data set 01
1950 Sylvania
Published operating points and test conditions from this source.
SECTION 1
Triode
Application
Service
Vertical deflection oscillator
SECTION 2
Beam Power
Application
Service
Vertical deflection amplifier
Power - TV Vertical Output ·BeamPower-Triode
6LU8
Television combination tube with a pulse-rated beam-power section designed for vertical-deflection output and an associated small-signal section for sweep circuitry.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 2
- Base
- 12DZ
- Socket code
- B9A
- Base pins
- 12
- Nominal heater
- 6.3 V / 1.5 A
Description
High-mu triode and beam power tube used as combined vertical-deflection oscillator and vertical-deflection amplifier in color television receivers.
Socket description
Small-button Noval 9-contact
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- 12DZ
- Socket code
- B9A
- Base pins
- 12
- Nominal heater voltage
- 6.3 V
- Nominal heater current
- 1.5 A
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
12DZ - Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
2 physical sections, each with unique specifications.
Section 1
Triode
X-ray radiationInterelectrode capacitances
- Plate resistance
- 16000 Ω
- Transconductance
- 0.0036 S
- Amplification factor
- 58
- Max plate voltage
- 400 V
- Max plate dissipation
- 2.5 W
- Max cathode current
- 30 mA
Published source values promoted where applicable.
Section 2
Beam Power
X-ray radiationInterelectrode capacitances
- Plate resistance
- 12000 Ω
- Transconductance
- 0.0093 S
- Amplification factor
- 6.5
- Max plate voltage
- 400 V
- Max screen voltage
- 300 V
- Max plate dissipation
- 14 W
- Max screen dissipation
- 2.75 W
- Max cathode current
- 75 mA
Published source values promoted where applicable.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 02
1968 General Electric Co
Published operating points and test conditions from this source.
SECTION 1
Triode
Other
Maximum Plate Voltage
400 V
Maximum Plate Dissipation
2.5 W
Maximum Cathode Current
30 mA
Characteristic
Plate Resistance
16000 ohm
Transconductance
3600 uS
Amplification Factor
58
Interelectrode Capacitances Published
true
SECTION 2
Beam Power
Other
Maximum Plate Voltage
400 V
Maximum Screen Voltage
300 V
Maximum Plate Dissipation
14 W
Maximum Screen Dissipation
2.75 W
Maximum Cathode Current
75 mA
Characteristic
Plate Resistance
12000 ohm
Transconductance
9300 uS
Amplification Factor
6.5
Interelectrode Capacitances Published
true
Data set 03
1975 RCA RC30
Published operating points and test conditions from this source.
SECTION 1
Triode
Other
Heater Voltage
6.3 V
Nominal
Heater Current
1.5 A
Nominal
Peak Heater-Cathode Voltage
200 V
Average Heater-Cathode Voltage
100 V
Plate Voltage
250 V
ClassA
Control Grid Voltage
-4 V
ClassA
Plate Current
2.3 mA
ClassA
Peak Negative-Pulse Control-Grid Voltage
400 V
VerticalDeflection
SECTION 2
Beam Power
Other
Plate Voltage
135 V
ClassA
Control Grid Voltage
-10 V
ClassA
Plate Current
56 mA
ClassA
Screen Voltage
120 V
ClassA
Peak Positive-Pulse Plate Voltage
2500 V
VerticalDeflection
Peak Negative-Pulse Control-Grid Voltage
250 V
VerticalDeflection
Bulb Temperature
210 C
VerticalDeflection