Data set 01
198X Shuguang
Published operating points and test conditions from this source.
SECTION 1
Pentode
Characteristics
Heater voltage
6.3 V
Nominal
Heater current
300 mA
Nominal
Plate voltage
250 V
Published principal electrical parameter
Voltage Pentode - High Frequency (single) ·Pentode
6K3P
Indirectly heated oxide-cathode pentode intended for high-frequency voltage amplification. Manufacturer documentation identifies it as an RF signal-amplifier tube rather than a power-output or specialized conversion device.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 1
- Base
- -
- Socket code
- -
- Base pins
- -
- Nominal heater
- 6.3 V / 300 mA
Description
Indirectly heated oxide-cathode pentode intended for high-frequency voltage amplification.
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- -
- Base pins
- -
- Nominal heater voltage
- 6.3 V
- Nominal heater current
- 300 mA
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
1 physical section, each with unique specifications.
Section 1
Pentode
X-ray radiationInterelectrode capacitances
- Transconductance
- 0.002 S
- Max plate voltage
- 330 V
- Max screen voltage
- 140 V
- Max plate dissipation
- 4.4 W
- Max screen dissipation
- 0.44 W
Published electrical data translated from the supplied Chinese-language source; repeated identical sections are compressed per project rules.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.