Data set 01
1958 Compagnie General
Published operating points and test conditions from this source.
Triode
Characteristic
Heater Voltage
6.3 V
Heater Current
450 mA
Voltage - Dual Triode (similar high frequency) ·Triode-Triode
Ruggedized common-cathode twin triode for professional and military high-frequency service, with documented UHF oscillator operation and robust construction.
Ruggedized common-cathode double triode for professional and military service.
Miniature 7-contact
General specifications
Properties common to every published source and operating point.
Electrical assignments shared by every tube using this base designation.
| Terminal | Section | Connection | Evidence |
|---|---|---|---|
| PIN12P | B | P — Plate (Anode) EIA chart transcription; manufacturer confirmation pending | Unverified EIA Base Connections, printed page 128, 7BF |
| PIN21P | A | P — Plate (Anode) EIA chart transcription; manufacturer confirmation pending | Unverified EIA Base Connections, printed page 128, 7BF |
| PIN3H | — | H — Heater EIA chart transcription; manufacturer confirmation pending | Unverified EIA Base Connections, printed page 128, 7BF |
| PIN4H | — | H — Heater EIA chart transcription; manufacturer confirmation pending | Unverified EIA Base Connections, printed page 128, 7BF |
| PIN51G1 | A | G1 — Control Grid EIA chart transcription; manufacturer confirmation pending | Unverified EIA Base Connections, printed page 128, 7BF |
| PIN62G1 | B | G1 — Control Grid EIA chart transcription; manufacturer confirmation pending | Unverified EIA Base Connections, printed page 128, 7BF |
| PIN7K | A | K — Cathode EIA chart transcription; manufacturer confirmation pending | Unverified EIA Base Connections, printed page 128, 7BF |
2 physical sections, each with unique specifications.
Section 1
Published maximum ratings, characteristics, operating conditions and capacitances reviewed.
Section 2
Second physical triode section; electrically identical twin section.
Source-dependent data
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 01
Published operating points and test conditions from this source.
Heater Voltage
6.3 V
Heater Current
450 mA
Data set 02
Published operating points and test conditions from this source.
Maximum plate voltage
300 V
Published handbook rating
Plate voltage
100 V
ClassA
Control-grid bias
8.5 V
ClassA
Plate resistance
7100 ohm
Published handbook characteristic
Transconductance
5300 µS
Published handbook characteristic
Amplification factor
38
Published handbook characteristic
Heater voltage
6.3 V
Published heater rating
Heater current
450 mA
Published heater rating
Input capacitance
2.6 pF
Published capacitance column
Output capacitance
1.6 pF
Published capacitance column
Grid-to-plate capacitance
1.5 pF
Published capacitance column
Data set 03
Published operating points and test conditions from this source.
Cathode resistor
50 Ω
UHFOscillator;EachSection
Plate voltage
100 V
UHFOscillator;EachSection
Plate current
8.5 mA
UHFOscillator;EachSection
Plate resistance
7170 Ω
EachSection
Transconductance
5300 µS
EachSection
Amplification factor
38
EachSection