Skip to main content
Tube Tinker — Electron Tube Database
Alternatives & variationsDownload PDF datasheet

Voltage Radio Detector Converter ·Pentode-Triode

6HG8

Medium-mu triode plus frame-grid sharp-cutoff pentode used as a combined oscillator/mixer and television IF/video amplifier.

Directly heatedCold cathodeCommon cathodeDissimilar
Sections
2
Base
9MP
Socket code
B9A
Base pins
9
Nominal heater
6.3 V / 340 mA

Description

Medium-mu triode plus frame-grid sharp-cutoff pentode used as combined oscillator/mixer and television IF/video amplifier.

Socket description

Small-button Noval 9-contact

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
9MP
Socket code
B9A
Base pins
9
Nominal heater voltage
6.3 V
Nominal heater current
340 mA
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

9MP - Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

2 physical sections, each with unique specifications.

Section 1

Triode

X-ray radiationInterelectrode capacitances
Plate resistance
5000 Ω
Transconductance
0.007 S
Amplification factor
40
Max plate voltage
125 V
Max plate dissipation
1.5 W
Max cathode current
16 mA

Published typical operating conditions, UHF/deflection ratings, and descriptive application reviewed.

Section 2

Pentode

X-ray radiationInterelectrode capacitances
Plate resistance
150000 Ω
Transconductance
0.01 S
Max plate voltage
250 V
Max screen voltage
330 V
Max plate dissipation
2.5 W
Max screen dissipation
0.55 W
Max cathode current
18 mA

Published typical operating conditions, UHF/deflection ratings, and descriptive application reviewed.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1963 Amperex Condensed

Published operating points and test conditions from this source.

SECTION 1

Triode

Characteristic

  • Heater voltage

    6.3 V

    Published heater rating

  • Heater current

    340 mA

    Published heater rating

Other

  • Triode plate voltage

    100 V

    TriodeSection Oscillator

  • Triode control-grid bias

    -3 V

    TriodeSection Oscillator

  • Triode plate current

    14 mA

    TriodeSection Oscillator

SECTION 2

Pentode

Other

  • Pentode plate voltage

    170 V

    PentodeSection Mixer

  • Pentode screen voltage

    150 V

    PentodeSection Mixer

  • Pentode control-grid bias

    -1.5 V

    PentodeSection Mixer

  • Pentode plate current

    10 mA

    PentodeSection Mixer

  • Pentode screen current

    3.3 mA

    PentodeSection Mixer

Characteristic

  • Pentode amplification factor

    60

    PentodeSection Mixer

  • Pentode plate resistance

    350000 ohm

    PentodeSection Mixer

  • Pentode transconductance

    12000 µS

    PentodeSection Mixer

Data set 02

1975 RCA RC30

Published operating points and test conditions from this source.

SECTION 1

Triode

Other

  • For fixed-bias operation 0.5

    0.25 MΩ

    Published in approved ECF86 target datasheet entry; Section1

  • For cathode-bias operation 1

    1 MΩ

    Published in approved ECF86 target datasheet entry; Section1

  • Heater Voltage (ac/dc) 5.3 6.3

    7.2 V

    Published in approved ECF86 target datasheet entry; Section1

  • Heater Current

    300 mA

    Published in approved ECF86 target datasheet entry; Section1

  • Plate Voltage 125

    250 V

    Published in approved ECF86 target datasheet entry; Section1

  • Grid-No.2 (Screen-Grid) Voltage

    150 V

    Published in approved ECF86 target datasheet entry; Section1

  • Plate Dissipation 1.5

    2 W

    Published in approved ECF86 target datasheet entry; Section1

  • Grid-No.2 Input

    0.5 W

    Published in approved ECF86 target datasheet entry; Section1

  • Plate Voltage 100

    170 V

    Published in approved ECF86 target datasheet entry; Section1

  • Grid-No.2 Voltage

    160 V

    Published in approved ECF86 target datasheet entry; Section1

  • Voltage —3

    -1.2 V

    Published in approved ECF86 target datasheet entry; Section1

  • Transconductance 5500

    12000 µS

    Published in approved ECF86 target datasheet entry; Section1

  • Plate Current 14

    10 mA

    Published in approved ECF86 target datasheet entry; Section1

  • Grid-No.2 Current

    3.3 mA

    Published in approved ECF86 target datasheet entry; Section1

  • For fixed-bias operation

    0.25 MΩ

    Published in approved ECF86 target datasheet entry; Section1

  • For cathode-bias operation 0.5

    0.5 MΩ

    Published in approved ECF86 target datasheet entry; Section1

  • amperes, 0.6; warm-up time (average),

    11 seconds

    Published in approved ECF86 target datasheet entry; Section1

  • Plate Voltage 330

    330 V

    Published in approved ECF86 target datasheet entry; Section1

  • Grid-No.2 (Screen-Grid) Supply Voltage

    330 V

    Published in approved ECF86 target datasheet entry; Section1

  • 0

    0 V

    Published in approved ECF86 target datasheet entry; Section1

  • Plate Dissipation 2.5

    2.5 W

    Published in approved ECF86 target datasheet entry; Section1

  • For grid-No.2 voltages up to

    165 V

    Published in approved ECF86 target datasheet entry; Section1

  • For grid-No.2 voltages between 165 and

    330 V

    Published in approved ECF86 target datasheet entry; Section1

Characteristic

  • Plate Resistance (Approx.)

    0.35 MΩ

    Published in approved ECF86 target datasheet entry; Section1

  • Plate Voltage 125

    125 V

    Published in approved ECF86 target datasheet entry; Section1

  • Grid-No.2 Voltage

    125 V

    Published in approved ECF86 target datasheet entry; Section1

  • Grid-No.l Voltage 1 —

    -1 V

    Published in approved ECF86 target datasheet entry; Section1

  • Plate Resistance (Approx.) 5000

    150000 Ω

    Published in approved ECF86 target datasheet entry; Section1

  • Transconductance 7000

    10000 µS

    Published in approved ECF86 target datasheet entry; Section1

  • Plate Current 12.5

    12 mA

    Published in approved ECF86 target datasheet entry; Section1

  • 20 iiA —

    -7 V

    Published in approved ECF86 target datasheet entry; Section1

SECTION 2

Pentode

Other

  • For fixed-bias operation 0.5

    0.25 MΩ

    Published in approved ECF86 target datasheet entry; Section2

  • For cathode-bias operation 1

    1 MΩ

    Published in approved ECF86 target datasheet entry; Section2

  • Heater Voltage (ac/dc) 5.3 6.3

    7.2 V

    Published in approved ECF86 target datasheet entry; Section2

  • Heater Current

    300 mA

    Published in approved ECF86 target datasheet entry; Section2

  • Plate Voltage 125

    250 V

    Published in approved ECF86 target datasheet entry; Section2

  • Grid-No.2 (Screen-Grid) Voltage

    150 V

    Published in approved ECF86 target datasheet entry; Section2

  • Plate Dissipation 1.5

    2 W

    Published in approved ECF86 target datasheet entry; Section2

  • Grid-No.2 Input

    0.5 W

    Published in approved ECF86 target datasheet entry; Section2

  • Plate Voltage 100

    170 V

    Published in approved ECF86 target datasheet entry; Section2

  • Grid-No.2 Voltage

    160 V

    Published in approved ECF86 target datasheet entry; Section2

  • Voltage —3

    -1.2 V

    Published in approved ECF86 target datasheet entry; Section2

  • Transconductance 5500

    12000 µS

    Published in approved ECF86 target datasheet entry; Section2

  • Plate Current 14

    10 mA

    Published in approved ECF86 target datasheet entry; Section2

  • Grid-No.2 Current

    3.3 mA

    Published in approved ECF86 target datasheet entry; Section2

  • For fixed-bias operation

    0.25 MΩ

    Published in approved ECF86 target datasheet entry; Section2

  • For cathode-bias operation 0.5

    0.5 MΩ

    Published in approved ECF86 target datasheet entry; Section2

  • amperes, 0.6; warm-up time (average),

    11 seconds

    Published in approved ECF86 target datasheet entry; Section2

  • Plate Voltage 330

    330 V

    Published in approved ECF86 target datasheet entry; Section2

  • Grid-No.2 (Screen-Grid) Supply Voltage

    330 V

    Published in approved ECF86 target datasheet entry; Section2

  • 0

    0 V

    Published in approved ECF86 target datasheet entry; Section2

  • Plate Dissipation 2.5

    2.5 W

    Published in approved ECF86 target datasheet entry; Section2

  • For grid-No.2 voltages up to

    165 V

    Published in approved ECF86 target datasheet entry; Section2

  • For grid-No.2 voltages between 165 and

    330 V

    Published in approved ECF86 target datasheet entry; Section2

Characteristic

  • Plate Resistance (Approx.)

    0.35 MΩ

    Published in approved ECF86 target datasheet entry; Section2

  • Plate Voltage 125

    125 V

    Published in approved ECF86 target datasheet entry; Section2

  • Grid-No.2 Voltage

    125 V

    Published in approved ECF86 target datasheet entry; Section2

  • Grid-No.l Voltage 1 —

    -1 V

    Published in approved ECF86 target datasheet entry; Section2

  • Plate Resistance (Approx.) 5000

    150000 Ω

    Published in approved ECF86 target datasheet entry; Section2

  • Transconductance 7000

    10000 µS

    Published in approved ECF86 target datasheet entry; Section2

  • Plate Current 12.5

    12 mA

    Published in approved ECF86 target datasheet entry; Section2

  • 20 iiA —

    -7 V

    Published in approved ECF86 target datasheet entry; Section2