Skip to main content
Tube Tinker — Electron Tube Database
Alternatives & variationsDownload PDF datasheet

Power - TV Horizontal Output (sweep) ·BeamPower

6GT5A

Novar beam-power tube designed as a horizontal-deflection amplifier in television receivers.

Directly heatedCold cathodeCommon cathodeDissimilar
Sections
1
Base
9NZ
Socket code
B9E
Base pins
9
Nominal heater
6.3 V / 1.2 A

Description

Novar beam-power tube used as a horizontal-deflection amplifier in television receivers.

Socket description

Novar 9-contact

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
9NZ
Socket code
B9E
Base pins
9
Nominal heater voltage
6.3 V
Nominal heater current
1.2 A
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

9NZ - Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Beam Power

X-ray radiationInterelectrode capacitances
Plate resistance
15000 Ω
Transconductance
0.0071 S
Amplification factor
4.4
Max plate voltage
770 V
Max screen voltage
220 V
Max plate dissipation
17.5 W
Max screen dissipation
3.5 W
Max cathode current
175 mA

Horizontal-deflection beam-power amplifier.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1971 RCA HB3 Binder 5 of 7

Published operating points and test conditions from this source.

SECTION 1

Beam Power

Other

  • Heater voltage

    6.3 V

  • Heater current

    1.2 A

  • DC plate-supply voltage

    770 V

    HorizontalDeflection

  • Peak positive-pulse plate voltage

    6500 V

    HorizontalDeflection

  • DC screen voltage

    220 V

    HorizontalDeflection

  • Average cathode current

    175 mA

    HorizontalDeflection

  • Plate dissipation

    17.5 W

    HorizontalDeflection

Application

  • Application

    Television horizontal-deflection amplifier

Characteristic

  • Plate voltage

    250 V

    ClassA

  • Screen voltage

    150 V

    ClassA

  • Plate current

    70 mA

    ClassA

  • Transconductance

    7100 uS

    ClassA

  • Plate resistance

    15000 ohm

    ClassA

Capacitance

  • Grid-to-plate capacitance

    0.26 pF

Data set 02

1975 RCA RC30

Published operating points and test conditions from this source.

SECTION 1

Beam Power

Other

  • Oscillator Voltage

    4.5 V

    Published in approved 17GT5A target datasheet entry; Section1

  • Plate Current

    12 mA

    Published in approved 17GT5A target datasheet entry; Section1

  • Transconductance

    3500 µS

    Published in approved 17GT5A target datasheet entry; Section1

  • 6.3

    16.8 V

    Published in approved 17GT5A target datasheet entry; Section1

  • 1.2

    450 mA

    Published in approved 17GT5A target datasheet entry; Section1

  • Heater Warm-up Time (Average)

    11 seconds

    Published in approved 17GT5A target datasheet entry; Section1

  • DC Plate Supply Voltage

    770 V

    Published in approved 17GT5A target datasheet entry; Section1

  • Peak Positive-Pulse Plate Voltage#

    6500 V

    Published in approved 17GT5A target datasheet entry; Section1

  • Peak Negative-Pulse Plate Voltage

    1500 V

    Published in approved 17GT5A target datasheet entry; Section1

  • Peak Negative-Pulse Grid-No.l Voltage

    330 V

    Published in approved 17GT5A target datasheet entry; Section1

  • Peak Cathode Current

    550 mA

    Published in approved 17GT5A target datasheet entry; Section1

  • Average Cathode Current

    176 mA

    Published in approved 17GT5A target datasheet entry; Section1

  • Plate Dissipation*

    17.5 W

    Published in approved 17GT5A target datasheet entry; Section1

  • Grid-No.2 Input

    3.6 W

    Published in approved 17GT5A target datasheet entry; Section1

  • Grid-No.l-Circuit Resistance, for grid-resistor-bias operation*

    1 MΩ

    Published in approved 17GT5A target datasheet entry; Section1

  • # Pulse duration must not exceed 15% of a horizontal scanning cycle (

    10 microseconds

    Published in approved 17GT5A target datasheet entry; Section1

  • Heater Voltage (ac/dc) 6.3

    8.4 V

    Published in approved 17GT5A target datasheet entry; Section1

  • Heater Current 0.6

    450 mA

    Published in approved 17GT5A target datasheet entry; Section1

  • Heater Warm-up Time (Average) 11

    11 seconds

    Published in approved 17GT5A target datasheet entry; Section1

  • Plate Voltage

    330 V

    Published in approved 17GT5A target datasheet entry; Section1

  • Grid Voltage, Positive-bias value

    0 V

    Published in approved 17GT5A target datasheet entry; Section1

  • Plate Dissipation

    3 W

    Published in approved 17GT5A target datasheet entry; Section1

  • Plate Voltage

    250 V

    Published in approved 17GT5A target datasheet entry; Section1

  • Grid Voltage

    -10.5 V

    Published in approved 17GT5A target datasheet entry; Section1

  • Plate Resistance (Approx.)

    5500 Ω

    Published in approved 17GT5A target datasheet entry; Section1

  • Transconductance

    3100 µS

    Published in approved 17GT5A target datasheet entry; Section1

Capacitance

  • Grid No.l to Plate

    0.26 pF

    Published in approved 17GT5A target datasheet entry; Section1

  • Grid No.l to Cathode, Heater, Grid No.2, and Grid No.3

    15 pF

    Published in approved 17GT5A target datasheet entry; Section1

  • Plate to Cathode, Heater, Grid No.2, and Grid No.3

    6.5 pF

    Published in approved 17GT5A target datasheet entry; Section1

  • Grid to Plate 3

    3 pF

    Published in approved 17GT5A target datasheet entry; Section1

  • Grid to Cathode and Heater 3.4

    3.6 pF

    Published in approved 17GT5A target datasheet entry; Section1

  • Plate to Cathode and Heater 0.44

    0.34 pF

    Published in approved 17GT5A target datasheet entry; Section1

  • Plate of Unit No.l to Plate of Unit No.2

    1 pF

    Published in approved 17GT5A target datasheet entry; Section1

Characteristic

  • Plate Voltage 150 60

    250 V

    Published in approved 17GT5A target datasheet entry; Section1

  • Grid-No.2 (Screen-Grid) Voltage 150 150

    150 V

    Published in approved 17GT5A target datasheet entry; Section1

  • Grid-No.l (Control-Grid) Voltage —22.5 0

    -22.5 V

    Published in approved 17GT5A target datasheet entry; Section1

  • 390 •

    70 mA

    Published in approved 17GT5A target datasheet entry; Section1

  • Grid-No.2 Current 32*

    2.1 mA

    Published in approved 17GT5A target datasheet entry; Section1