Data set 01
1961 Tung Sol
Published operating points and test conditions from this source.
SECTION 1
Diode
Other
Heater voltage
6.3 V
Heater current
450 mA
Diode (NOT rectifier) ·Diode-Diode-Diode
6GQ7
Triple high-perveance diode containing three sections for AM detection and FM detector or discriminator circuits.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 3
- Base
- 9QM
- Socket code
- -
- Base pins
- 9
- Nominal heater
- 6.3 V / 450 mA
Description
The 6GQ7 contains three high-perveance diode sections in a 9-pin miniature envelope for AM detection and FM detector or discriminator circuits.
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- 9QM
- Socket code
- -
- Base pins
- 9
- Nominal heater voltage
- 6.3 V
- Nominal heater current
- 450 mA
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
9QM - Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
3 physical sections, each with unique specifications.
Section 1
Diode
X-ray radiationInterelectrode capacitances
- Rectifier peak inverse voltage
- 330 V
- Rectifier nominal output current
- 9 mA
- Rectifier peak forward current
- 54 mA
- Rectifier forward voltage drop
- 10 V
Representative identical diode section; tube contains three diodes.
Section 2
Diode
X-ray radiationInterelectrode capacitances
No fixed ratings are recorded for this section.
Physical diode section added to match documented multi-diode construction.
Section 3
Diode
X-ray radiationInterelectrode capacitances
No fixed ratings are recorded for this section.
Physical diode section added to match documented multi-diode construction.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 02
1966 Tung Sol Electronic Tubes 2 of 4
Published operating points and test conditions from this source.
SECTION 1
Diode
Capacitance
Plate input capacitance
2.05 pF
Cathode input capacitance
3.1 pF
Plate-to-plate capacitance
0.47 pF
Other
AC plate voltage RMS
117 V
EachDiode
Minimum effective plate supply impedance
300 ohm
EachDiode
Characteristics
Resonant frequency
700 MHz
Approximate;EachDiode