Skip to main content

Voltage - Triode (single high frequency) ·Triode

6FY5

Remote-cutoff frame-grid shielded triode for VHF television RF amplification at low supply voltage.

Directly heatedCold cathodeCommon cathodeDissimilar
Sections
1
Base
7FP
Socket code
B7G
Base pins
7
Nominal heater
6.3 V / 200 mA

Description

Remote-cutoff frame-grid shielded triode for VHF television RF amplification at low supply voltage.

Socket description

Miniature 7-contact

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
7FP
Socket code
B7G
Base pins
7
Nominal heater voltage
6.3 V
Nominal heater current
200 mA
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

7FP - Terminal pinout

Electrical assignments shared by every tube using this base designation.

TerminalSectionConnectionEvidence
PIN1KAK — Cathode

EIA transcription; manufacturer confirmation pending

Unverified

EIA Base Connections, printed page 129, 7FP

PIN2G1AG1 — Control Grid

EIA transcription; manufacturer confirmation pending

Unverified

EIA Base Connections, printed page 129, 7FP

PIN3H—H — Heater

EIA transcription; manufacturer confirmation pending

Unverified

EIA Base Connections, printed page 129, 7FP

PIN4H—H — Heater

EIA transcription; manufacturer confirmation pending

Unverified

EIA Base Connections, printed page 129, 7FP

PIN5PAP — Plate (Anode)

EIA transcription; manufacturer confirmation pending

Unverified

EIA Base Connections, printed page 129, 7FP

PIN6ISAIS — Internal Screen

EIA transcription; manufacturer confirmation pending

Unverified

EIA Base Connections, printed page 129, 7FP

PIN7KAK — Cathode

EIA transcription; manufacturer confirmation pending

Unverified

EIA Base Connections, printed page 129, 7FP

Section ratings

1 physical section, each with unique specifications.

Section 1

Triode

X-ray radiationInterelectrode capacitances
Transconductance
0.013 S
Amplification factor
70
Max plate voltage
200 V
Max plate dissipation
2.2 W
Max cathode current
20 mA

Published typical operating conditions, UHF/deflection ratings, and descriptive application reviewed.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1950 Sylvania

Published operating points and test conditions from this source.

SECTION 1

Triode

Other

  • PlateVoltageTypical

    200 V

    Published operating/characteristic value

  • PlateCurrentTypical

    11 mA

    Published operating/characteristic value

Data set 02

1961 Tung Sol

Published operating points and test conditions from this source.

SECTION 1

Triode

Other

  • Heater voltage

    6.3 V

  • Heater current

    200 mA

  • Plate voltage

    200 V

    Typical operating conditions

  • Plate current

    110.1 mA

    Typical operating conditions

Data set 03

1963 Amperex Condensed

Published operating points and test conditions from this source.

SECTION 1

Triode

Other

  • Plate voltage

    135 V

    Published table

  • Control-grid bias

    -4.5 V

    Published table

  • Plate current

    11 mA

    Published table

  • Application

    VHF television tuner RF amplifier

    Published description

Characteristic

  • Transconductance

    13000 µS

    Published table

  • Amplification factor

    70

    Published table

  • Heater voltage

    6.3 V

    Published heater rating

  • Heater current

    200 mA

    Published heater rating

Data set 04

1966 Tung Sol Electronic Tubes 2 of 4

Published operating points and test conditions from this source.

SECTION 1

Triode

Capacitance

  • Input capacitance

    4.75 pF

  • Output capacitance

    3.3 pF

  • Grid-to-heater capacitance

    0.28 pF

  • Plate-to-cathode capacitance

    0.25 pF

  • Grid-to-cathode capacitance

    3.2 pF

  • Cathode-to-heater capacitance

    2.5 pF

  • Plate-to-grid capacitance

    0.7 pF

Other

  • Plate voltage

    135 V

    Typical

  • Grid bias

    -1 V

    Typical;HighGainPoint

  • Plate current

    11 mA

    Typical;HighGainPoint

  • Zero-current plate-voltage rating

    550 V

Characteristic

  • Transconductance

    13000 uS

    Typical;HighGainPoint

  • Amplification factor

    70