Data set 01
1965 Ericsson Longlife
Published operating points and test conditions from this source.
SECTION 1
Tetrode
Characteristics
Plate Voltage
125 V
Voltage Tetrode ·Tetrode
6EV5CATV
Ericsson 6EV5/CATV long-life miniature seven-pin sharp-cutoff RF tetrode for dependable cable television distribution amplifiers, specially developed from the 6EV5 for extended CATV service.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 1
- Base
- -
- Socket code
- -
- Base pins
- 7
- Nominal heater
- -
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- -
- Base pins
- 7
- Nominal heater voltage
- -
- Nominal heater current
- -
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
1 physical section, each with unique specifications.
Section 1
Tetrode
X-ray radiationInterelectrode capacitances
No fixed ratings are recorded for this section.
Ericsson 6EV5/CATV long-life sharp-cutoff RF tetrode, special 7-pin small-button E7-1 variant developed for cable television amplifier service. Manufacturer describes shielded cold grid-to-plate, input and output capacitances, with external shield tied to cathode. Basing: pin 1 grid-1; pins 2 and 7 cathode/internal shield; pins 3 and 4 heater; pin 5 plate; pin 6 screen grid-2. Published typical operation and lifetime acceptance tables contain OCR-alignment problems, so numerical heater, maximum voltage/dissipation and gm/rp fields deliberately left unset rather than inferred. Manufacturer 125 V anode operating test condition exists but is not a confirmed absolute maximum.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.