Alternatives & variations Download PDF datasheet

6C10P

Russian indirectly heated damping diode designed for television horizontal line-scanning circuits, with kilovolt pulse ratings and specified line-scan operation.

Directly heatedCold cathodeCommon cathodeDissimilar

Sections: 1
Base: -
Socket code: B9A
Base pins: -
Nominal heater: 6.3 V / 1.05 A

Description

The 6C10P is an indirectly heated damping diode for television horizontal line-scanning circuits.

Socket description

Small-button Noval 9-contact

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base: -
Socket code: B9A
Base pins: -
Nominal heater voltage: 6.3 V
Nominal heater current: 1.05 A
Parallel heater voltage: -
Parallel heater current: -
Series capable: No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Rectifier

X-ray radiationInterelectrode capacitances

Plate resistance: 130 Ω
Rectifier peak inverse voltage: 4500 V
Rectifier nominal output current: 120 mA
Rectifier peak forward current: 450 mA
Rectifier warm-up time: 1 s

REDO promoted fields populated from published specification/maximum-rating tables where applicable.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

195X Russian

Published operating points and test conditions from this source.

SECTION 1

Rectifier

Characteristics

Anode voltage
20 V
Published test point
Anode current
150 mA
Published test point
Internal resistance
130 Ohm
Published value
Rectified current
120 mA
Average
Anode pulse current
450 mA
Published value
Pulse duration
12 us
Published nominal
Line scanning frequency
16 kHz
Published nominal
Cathode-heater capacitance
4.5 pF
Published value
Warm-up time
1 s
Published value

Other

Peak reverse anode voltage
4.5 kV
Pulse
Peak cathode-heater voltage
4.5 kV
Pulse