Data set 01
1961 Tung Sol
Published operating points and test conditions from this source.
SECTION 1
Triode
Other
Plate Voltage
150 V
ClassA
Characteristic
Plate Current
9 mA
ClassA
TransconductancePublished
6800 uS
ClassA
Voltage - Triode (single high frequency) ·Triode
6BN4
Medium-mu triode designed for VHF television-tuner RF amplification, providing front-end signal gain in television receiving equipment.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 1
- Base
- -
- Socket code
- B7G
- Base pins
- 7
- Nominal heater
- 6.3 V / 200 mA
Description
Medium-mu triode for VHF television-tuner RF amplification.
Socket description
Miniature 7-contact
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- B7G
- Base pins
- 7
- Nominal heater voltage
- 6.3 V
- Nominal heater current
- 200 mA
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
1 physical section, each with unique specifications.
Section 1
Triode
X-ray radiationInterelectrode capacitances
- Plate resistance
- 6300 Ω
- Transconductance
- 0.0068 S
- Amplification factor
- 43
- Max plate voltage
- 275 V
- Max plate dissipation
- 2.2 W
- Max cathode current
- 22 mA
Medium-mu triode for VHF television-tuner RF amplification.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 02
1966 Tung Sol Electronic Tubes 1 of 4
Published operating points and test conditions from this source.
SECTION 1
Triode
Capacitance
Grid-to-plate capacitance
1.2 pF
Input capacitance
3.2 pF
Output capacitance
1.4 pF
Heater-to-cathode capacitance
2.8 pF
Other
Plate voltage
150 V
ClassA; VHF
Plate current
9 mA
ClassA; VHF
Characteristic
Amplification factor
43
Plate resistance
6.3 kOhm
Transconductance
6400 uS
Data set 03
1968 General Electric Co
Published operating points and test conditions from this source.
SECTION 1
Triode
Other
Typical Plate Voltage
150 V
ClassA
Typical Plate Current
9 mA
ClassA