Triode - HV Shunt Regulator ·Triode
High-voltage triode designed for electronic voltage-regulator service, controlling or shunting current to stabilize demanding power supplies.
High-voltage low-current beam triode for shunt-regulator service in color television receivers.
International Octal
General specifications
Properties common to every published source and operating point.
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
1 physical section, each with unique specifications.
Section 1
High-voltage shunt-regulator beam triode.
Source-dependent data
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 01
Published operating points and test conditions from this source.
Unregulated DC Supply Voltage Maximum
60000 V
ShuntVoltageRegulator
Regulated DC Output Voltage
25000 V
LoadCurrent=0mA
UnregulatedSupplyVoltageTypical
36000 V
ShuntVoltageRegulator
Data set 02
Published operating points and test conditions from this source.
THE bBK
4 A
| THE bBK4A IS A SHARP CUT-OFF BEAM TRIODE FOR HIGH-VOLTAGE. LOW-CURRENT APPLI-
LIMITS OF APPLIED VOLTAGE - AC OR DC
0.6 V
Average Characteristics | LIMITS OF APPLIED VOLTAGE - AC OR DC 6.3 '- 0.6 VOLTS
HEATER NEGATIVE WITH RESPECT TO CATHODE
200 V
Average Characteristics | HEATER NEGATIVE WITH RESPECT TO CATHODE 200 VOLTS
GRID TO PLATE: G TO P
0.03 pF
Capacitances | GRID TO PLATE: G TO P 0.03 pf
GRID TO CATHODE AND HEATER: G TO (K+H)
2.6 pF
Capacitances | GRID TO CATHODE AND HEATER: G TO (K+H) 2.6 pf
PLATE TO CATHODE AND HEATER: P TO (K+H)
1 pF
Capacitances | PLATE TO CATHODE AND HEATER: P TO (K+H) 1.0 pf
MAXIMUM DC PLATE VOLTAGE
27 V
Maximum Ratings | MAXIMUM DC PLATE VOLTAGE 27.000 VOLTS
MAXIMUM UNREGULATED DC SUPPLY VOLTAGE
60 V
Maximum Ratings | MAXIMUM UNREGULATED DC SUPPLY VOLTAGE 60.000 VOLT`.
MAXIMUM PLATE DISSIPATION
30 W
Maximum Ratings | MAXIMUM PLATE DISSIPATION 30 WATT`.
MAXIMUM DC PLATE CURRENT
1.6 mA
Maximum Ratings | MAXIMUM DC PLATE CURRENT 1.6 MA
DC VOLTAGE
36 V
Typical Operating Conditions | DC VOLTAGE 36.000 VOLTS
EQUIVALENT RESISTANCE
11 Mohm
Typical Operating Conditions | EQUIVALENT RESISTANCE 11 MEGOHMS
EQUIVALENT RESISTANCE OF SUPPLY
1 ohm
Typical Operating Conditions | EQUIVALENT RESISTANCE OF SUPPLY 1.000 OHMS
FOR LOAD CURRENT OF
1 mA
Typical Operating Conditions | FOR LOAD CURRENT OF 1 MA. 45 µAMP.
FOR LOAD CURRENT OF O MA
25 V
Typical Operating Conditions | FOR LOAD CURRENT OF O MA. 25.000 VOLTS
FOR LOAD CURRENT OF
1 mA
Typical Operating Conditions | FOR LOAD CURRENT OF 1 MA. 24.500 VOLT
FOR LOAD CURRENT OF
24.5 V
Typical Operating Conditions | FOR LOAD CURRENT OF 1 MA. 24.500 VOLT