Tube cross-reference
6AS5 alternatives, equivalents, and replacements
Review exact electrical variations and directional substitutions recorded for the 6AS5 power - beam single (not sweep) (under 10w). Compare core specifications and verify every restriction before using a replacement.
Replacement tubes for 6AS5
The following tubes are recorded as possible replacements for 6AS5. This direction does not establish that 6AS5 can replace them.
Power - Beam Single (NOT sweep) (under 10W)
The database records 6CA5 as a possible replacement for6AS5.
- Parallel heater circuits only
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Power - Beam Single (NOT sweep) (under 10W) | Power - Beam Single (NOT sweep) (under 10W) |
| Construction | BeamPower | BeamPower |
| Base | 7 | 7CV |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.8 A | 1.2 A |
Where 6AS5 can be used as the replacement
In these recorded relationships, 6AS5 is the replacement tube. The listed original tubes are not automatically suitable as replacements for 6AS5.
Power - Beam Single (NOT sweep) (under 10W)
The database records 6AS5 as a possible replacement for6CA5.
- Parallel heater circuits only
| Specification | 6AS5 replacement | Original tube |
|---|---|---|
| Tube type | Power - Beam Single (NOT sweep) (under 10W) | Power - Beam Single (NOT sweep) (under 10W) |
| Construction | BeamPower | BeamPower |
| Base | 7 | 7CV |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.8 A | 1.2 A |
Power - Beam Single (NOT sweep) (under 10W)
The database records 6AS5 as a possible replacement for6CU5.
- Parallel heater circuits only
| Specification | 6AS5 replacement | Original tube |
|---|---|---|
| Tube type | Power - Beam Single (NOT sweep) (under 10W) | Power - Beam Single (NOT sweep) (under 10W) |
| Construction | BeamPower | BeamPower |
| Base | 7 | 7CY |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.8 A | 1.2 A |
Verify before substituting
Matching a base or heater voltage is not enough to prove that two tubes are interchangeable. Check pin connections, heater current, maximum ratings, bias requirements, warm-up behavior, and the equipment manufacturer’s service documentation before making a substitution.
View the complete 6AS5 specifications →