Tube cross-reference
6AG5WA alternatives, equivalents, and replacements
Review exact electrical variations and directional substitutions recorded for the 6AG5WA voltage pentode - sharp cutoff (single). Compare core specifications and verify every restriction before using a replacement.
Replacement tubes for 6AG5WA
The following tubes are recorded as possible replacements for 6AG5WA. This direction does not establish that 6AG5WA can replace them.
Voltage Pentode - Sharp Cutoff (single)
The database records 6186 as a possible replacement for6AG5WA.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode - Sharp Cutoff (single) | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | Not recorded | Not recorded |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.3 A | 0.3 A |
Where 6AG5WA can be used as the replacement
In these recorded relationships, 6AG5WA is the replacement tube. The listed original tubes are not automatically suitable as replacements for 6AG5WA.
Voltage Pentode - Sharp Cutoff (single)
The database records 6AG5WA as a possible replacement for6186.
No special restrictions are recorded for this substitution.
| Specification | 6AG5WA replacement | Original tube |
|---|---|---|
| Tube type | Voltage Pentode - Sharp Cutoff (single) | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | Not recorded | Not recorded |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.3 A | 0.3 A |
Voltage Pentode - Sharp Cutoff (single)
The database records 6AG5WA as a possible replacement for6AG5.
No special restrictions are recorded for this substitution.
| Specification | 6AG5WA replacement | Original tube |
|---|---|---|
| Tube type | Voltage Pentode - Sharp Cutoff (single) | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | Not recorded | E7-1 |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.3 A | 0.3 A |
Verify before substituting
Matching a base or heater voltage is not enough to prove that two tubes are interchangeable. Check pin connections, heater current, maximum ratings, bias requirements, warm-up behavior, and the equipment manufacturer’s service documentation before making a substitution.
View the complete 6AG5WA specifications →