Data set 01
1950 Sylvania
Published operating points and test conditions from this source.
SECTION 1
Triode
Other
Typical plate supply voltage
165 V
Voltage - Triode (single) ·Triode
6AF5G
General-purpose triode for receiving, amplification, driver, or electronic service as documented by the manufacturer.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 1
- Base
- 6O
- Socket code
- -
- Base pins
- 8
- Nominal heater
- 6.3 V / 300 mA
Description
Voltage-amplifier triode used principally as a driver tube.
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- 6O
- Socket code
- -
- Base pins
- 8
- Nominal heater voltage
- 6.3 V
- Nominal heater current
- 300 mA
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
6O - Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
1 physical section, each with unique specifications.
Section 1
Triode
X-ray radiationInterelectrode capacitances
- Plate resistance
- 4900 Ω
- Transconductance
- 0.0015 S
- Amplification factor
- 7.4
- Max plate voltage
- 180 V
Published promoted fields populated from the datasheet; identical repeated sections compressed where applicable.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 02
195X General Electric Essential Characteristics
Published operating points and test conditions from this source.
SECTION 1
Triode
Other
Plate voltage
180 V
ClassA
Grid voltage
-18 V
ClassA
Plate current
7 mA
ClassA
Data set 03
1961 Tung Sol
Published operating points and test conditions from this source.
SECTION 1
Triode
Other
Power Output
3.3 W
Approx10PercentTotalDistortion
Plate Voltage
180 V
Typical