Power - Triode (over 1000V 100W) ·Triode
Forced-air-cooled version of the 6960 industrial RF triode for induction and dielectric heating and plastic sealing. Approximately 6 kW plate dissipation and 10 kW Class C output provide substantial industrial RF power without water cooling.
Forced-air-cooled version of 6960 for industrial induction/dielectric heating and plastic sealing.
General specifications
Properties common to every published source and operating point.
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
1 physical section, each with unique specifications.
Section 1
Highest Class-C telegraphy/FM maximum ratings promoted.
Source-dependent data
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 01
Published operating points and test conditions from this source.
Amplification factor
32
Maximum direct anode current
2.2 A
Maximum direct grid current
600 mA
Maximum negative grid bias magnitude
1250 V
Maximum operating frequency for full ratings
30 MHz
Typical output power maximum
10 kW
ClassC;Frequency=30MHz
Typical drive power maximum
460 W
Typical anode voltage maximum
6500 V
Data set 02
Published operating points and test conditions from this source.
Maximum plate dissipation
6000 W
Typical plate voltage
6500 V
RF industrial service
Typical plate current
2 A
RF industrial service
Typical power output
10000 W
RF industrial service
Typical grid voltage
-450 V
RF industrial service
Typical grid current
600 mA
RF industrial service
Grid full-input power
55 W
RF industrial service
Grid-to-plate capacitance
11 pF
Grid-to-filament capacitance
16 pF
Plate-to-filament capacitance
0.3 pF