Skip to main content
Tube Tinker — Electron Tube Database
Alternatives & variationsDownload PDF datasheet

Specialized - Uncategorized ·Other

6713

Wideband high-vacuum electron-beam noise generator producing broadband reference noise across approximately 0.15–30 MHz for receiver measurement and calibration.

Directly heatedCold cathodeCommon cathodeDissimilarSpecialized
Sections
1
Base
-
Socket code
-
Base pins
-
Nominal heater
6.3 V / 150 mA

Description

Wide-band high-vacuum electron-beam noise generator for approximately 0.15–30 MHz.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
-
Socket code
-
Base pins
-
Nominal heater voltage
6.3 V
Nominal heater current
150 mA
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Other

X-ray radiationInterelectrode capacitances
Max plate voltage
150 V
Max plate dissipation
0.8 W
Max cathode current
10 mA

Published ratings/characteristics promoted from supplied source; additional conditions retained in parameter table.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1964 RMA EIA

Published operating points and test conditions from this source.

SECTION 1

Other

Characteristic

  • Heater Voltage

    6.3 V

  • Heater Current

    150 mA

  • OperatingFrequencyMinimum

    0.15 MHz

  • OperatingFrequencyMaximum

    30 MHz

  • NoiseOutputMinimum

    95 dB above 1uV/MHz

Other

  • Target Voltage

    200 V

  • BeamFormingVoltage

    -100 V

  • Anode Voltage

    150 V

  • TargetDissipation

    0.8 W

  • Cathode Current Maximum

    10 mA