Diode (NOT rectifier) ·Diode-Diode
High-perveance industrial twin diode for FM discrimination, clipping, switching, isolation, and related signal-rectification applications.
High-perveance miniature twin diode for FM discriminator, clipping, switching, and isolation circuits. Electrical ratings, characteristics, operating data, and special environmental information were extracted from the supplied source.
Miniature 7-contact
General specifications
Properties common to every published source and operating point.
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
2 physical sections, each with unique specifications.
Section 1
Alias/co-designation of 6AL5; Representative row for two electrically identical diodes.
Section 2
Physical second diode section added during approved section-structure reconciliation.
Source-dependent data
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 01
Published operating points and test conditions from this source.
Peak Inverse Voltage
275 V
Nominal DC Output Current
10 mA
Peak Forward Current
350 mA
AC Plate Voltage per Plate
117 V
DC Output Current per Plate
9 mA
Forward Voltage Drop
10 V
Data set 02
Published operating points and test conditions from this source.
Heater Voltage
6.3 V
Heater Current
150 mA
EquivalentType
6AL5
RenewalUse
Data set 03
Published operating points and test conditions from this source.
Heater voltage
6.3 V
Nominal
Heater current
300 mA
Nominal
Plate voltage
275 V
Published operating table; OperatingPoint1
Data set 04
Published operating points and test conditions from this source.
Heater Voltage
6.3 V
Heater Current
150 mA
EquivalentElectricalType
6AL5
Plate To Cathode Capacitance
3.2 pF
PeakInverseVoltageMaximum
330 V
PeakPlateCurrentMaximum
54 mA
DCOutputCurrentMaximum
9 mA
Data set 05
Published operating points and test conditions from this source.
VOLTAGE OPERATION — published value 1
6.3 V
Published datasheet table value; multiple values on a source row represent separate limits or operating conditions.
VOLTAGE OPERATION — published value 2
1.3 V
Published datasheet table value; multiple values on a source row represent separate limits or operating conditions.
PEAK INVERSE PLATE VOLTAGE
275 V
Published datasheet table value; multiple values on a source row represent separate limits or operating conditions.
STEADY-STATE PEAK PLATE CURRENT PER PLATE
60 mA
Published datasheet table value; multiple values on a source row represent separate limits or operating conditions.
DC OUTPUT CURRENT PER PLATE
10 mA
Published datasheet table value; multiple values on a source row represent separate limits or operating conditions.
Maximum peak inverse voltage
275 V
Promoted section value from the supplied datasheet.
Data set 06
Published operating points and test conditions from this source.
Heater voltage
6.3 V
Nominal
Heater current
300 mA
Nominal
Maximum peak inverse plate voltage
275 V
Promoted published value
PEAK INVERSE PLATE VOLTAGE
275 V
Maximum Ratings, Design-Maximum Values:
PEAK PLATE CURRENT
60 mA
Maximum Ratings, Design-Maximum Values:
DC PLATE CURRENT
10 mA
Maximum Ratings, Design-Maximum Values:
Heater negative with respect to cathode
275 V
Maximum Ratings, Design-Maximum Values:
Heater positive with respect to cathode
100 V
Maximum Ratings, Design-Maximum Values:
Heater Voltage
6.3 V
Characteristics:
much as
35 V
Characteristics:
volts
7.5 V
Characteristics:
Peak forward/plate current
60 mA
Promoted published value
Nominal/DC output current
10 mA
Promoted published value
Voltage
20 V
Current at
0.3 V
Plate Voltage
10 V
Characteristics:
Plate Current
60 mA
Characteristics:
135 volts positive with respect to cathode, and al l other
135 V
Characteristics: