Nixie ·Nixie
Cold-cathode bidirectional decade counter with a single output cathode and direct glow indication for counting and frequency-division circuits.
Cold-cathode bidirectional decade counter with single-output cathode and direct glow indication. The datasheet specifies anode/supply limits, counting frequency, and a typical resistor-biased operating point.
General specifications
Properties common to every published source and operating point.
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
1 physical section, each with unique specifications.
Section 1
Representative electrical section; promoted values mapped from published ratings/characteristics where applicable.
Source-dependent data
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 01
Published operating points and test conditions from this source.
Total anode current maximum
0.6 mA
Published datasheet value
Supply voltage minimum
350 V
AnodeToCathode
Input frequency maximum
4000 pps
Published datasheet value
Typical DC supply voltage
400 V
Published datasheet value
Data set 02
Published operating points and test conditions from this source.
Total anode current maximum
0.6 mA
Voltage between electrodes maximum
140 V
Excluding anode
Supply voltage minimum
350 V
Anode-to-cathode
Input frequency maximum
4000 pps
DC supply voltage
400 V
Anode resistor
0.047 MΩ
Cathode resistor
68000 Ω
Nominal tube drop
191 V
Typical operation
Output voltage
15 V
Across cathode resistor