Rectifier - Half Wave ·Rectifier
Directly heated half-wave high-vacuum rectifier for high-voltage, low-current industrial 60 Hz applications such as dust precipitators, with an explicit soft-X-ray operating warning.
The GL-6215 is a half-wave high-vacuum diode rectifier for high-voltage, low-current 60-cycle applications such as dust precipitators and other industrial equipment. The datasheet warns that high-voltage operation can produce soft X-rays.
General specifications
Properties common to every published source and operating point.
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
1 physical section, each with unique specifications.
Section 1
Promoted from clearly identified printed ratings/characteristics; additional published operating points and capacitances retained in TUBE_SECTION_PARAMETER.
Source-dependent data
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 01
Published operating points and test conditions from this source.
Tube voltage drop
56 V
At2mADC
DC output current maximum
1 mA
HalfWave
Peak inverse voltage maximum
18000 V
HalfWave
Peak current maximum
8 mA
HalfWave
Data set 02
Published operating points and test conditions from this source.
Steady State Peak Plate Current
8 mA
60Hz rectifier service
TransientPeakPlateCurrent
30 mA
MaximumDuration=0.2s
Peak Inverse Plate Voltage
18000 V
Rectifier Service at 60 Cycles per Second
Note The voltages employed
1 C
Rectifier Service at 60 Cycles per Second
PIN
3 C
Rectifier Service at 60 Cycles per Second
Er
1.25 V
Rectifier Service at 60 Cycles per Second