Tube cross-reference
6134 alternatives, equivalents, and replacements
Review exact electrical variations and directional substitutions recorded for the 6134 voltage pentode - sharp cutoff (single). Compare core specifications and verify every restriction before using a replacement.
Replacement tubes for 6134
The following tubes are recorded as possible replacements for 6134. This direction does not establish that 6134 can replace them.
Voltage Pentode - Sharp Cutoff (single)
The database records 6AC7W as a possible replacement for6134.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode - Sharp Cutoff (single) | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 8N | 8N |
| Socket | IO | IO |
| Base pins | 8 | 8 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.45 A | 0.45 A |
Where 6134 can be used as the replacement
In these recorded relationships, 6134 is the replacement tube. The listed original tubes are not automatically suitable as replacements for 6134.
Voltage Pentode - Sharp Cutoff (single)
The database records 6134 as a possible replacement for6AC7W.
No special restrictions are recorded for this substitution.
| Specification | 6134 replacement | Original tube |
|---|---|---|
| Tube type | Voltage Pentode - Sharp Cutoff (single) | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 8N | 8N |
| Socket | IO | IO |
| Base pins | 8 | 8 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.45 A | 0.45 A |
Voltage Pentode - Sharp Cutoff (single)
The database records 6134 as a possible replacement for6AC7.
No special restrictions are recorded for this substitution.
| Specification | 6134 replacement | Original tube |
|---|---|---|
| Tube type | Voltage Pentode - Sharp Cutoff (single) | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 8N | 8N |
| Socket | IO | IO |
| Base pins | 8 | 8 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.45 A | 0.45 A |
Verify before substituting
Matching a base or heater voltage is not enough to prove that two tubes are interchangeable. Check pin connections, heater current, maximum ratings, bias requirements, warm-up behavior, and the equipment manufacturer’s service documentation before making a substitution.
View the complete 6134 specifications →