Data set 01
1960 RCA Industrial and Communications Types
Published operating points and test conditions from this source.
SECTION 1
Diode
Characteristics
Heater Voltage
6.3 V
Heater Current
300 mA
Diode (NOT rectifier) ·Diode-Diode
6097
Ruggedized miniature twin diode for clippers, clampers, FM/AM detectors, and discriminators in military, industrial, and airborne equipment.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 2
- Base
- -
- Socket code
- IO
- Base pins
- 8
- Nominal heater
- 6.3 V / 300 mA
Description
Ruggedized miniature twin diode with an inter-section shield for independent operation, useful in clippers, clampers, FM/AM detector and discriminator circuits and military/industrial airborne equipment.
Socket description
International Octal
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- IO
- Base pins
- 8
- Nominal heater voltage
- 6.3 V
- Nominal heater current
- 300 mA
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
2 physical sections, each with unique specifications.
Section 1
Diode
X-ray radiationInterelectrode capacitances
- Rectifier peak inverse voltage
- 360 V
- Rectifier nominal output current
- 10 mA
- Rectifier peak forward current
- 60 mA
- Rectifier max heater-cathode voltage
- 360 V
Published promoted fields populated semantically; identical repeated sections compressed.
Section 2
Diode
X-ray radiationInterelectrode capacitances
No fixed ratings are recorded for this section.
Physical second diode section added during approved section-structure reconciliation.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 02
1961 Tung Sol
Published operating points and test conditions from this source.
SECTION 1
Diode
Capacitance
Plate1 To Plate2 Capacitance
0.068 pF
WithoutShield
Plate1 To Plate2 Capacitance
0.026 pF
WithShield
Data set 03
1966 Tung Sol Electronic Tubes 3 of 4
Published operating points and test conditions from this source.
SECTION 1
Diode
Other
Heater voltage
6.3 V
Heater current
300 mA
Maximum surge current per section
350 mA
AC plate voltage per plate RMS
117 V
HalfWave
Minimum effective plate-supply impedance per plate
300 ohm
HalfWave
DC output current per plate
9 mA
HalfWave
Minimum intermittent heater cycles
5000 cycles
Maximum peak inverse voltage
360 V
Nominal DC output current
10 mA
Maximum peak forward current
60 mA
Maximum heater-cathode voltage
360 V