Data set 01
1961 Tung Sol
Published operating points and test conditions from this source.
SECTION 1
Beam Power
Other
AltitudeMaximum
60000 ft
EnvelopeTemperatureMaximum
300 C
Power Output
4.5 W
Power - Beam (NOT sweep) ·BeamPower
6094
Hard-glass beam-power pentode designed for mobile equipment, high ambient temperatures, and severe vibration, shock, and acceleration.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 1
- Base
- -
- Socket code
- B9A
- Base pins
- 9
- Nominal heater
- 6.3 V / 600 mA
Description
The 6094 is a hard-glass beam-power pentode designed for mobile equipment, high ambient temperatures and severe vibration, shock and acceleration.
Socket description
Small-button Noval 9-contact
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- B9A
- Base pins
- 9
- Nominal heater voltage
- 6.3 V
- Nominal heater current
- 600 mA
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
1 physical section, each with unique specifications.
Section 1
Beam Power
X-ray radiationInterelectrode capacitances
- Transconductance
- 0.0041 S
- Max plate voltage
- 300 V
- Max screen voltage
- 275 V
- Max plate dissipation
- 14 W
- Max screen dissipation
- 2 W
- Max cathode current
- 75 mA
- Rectifier max heater-cathode voltage
- 450 V
Published characteristics and ratings promoted where clearly recoverable from source.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 02
1966 Tung Sol Electronic Tubes 4 of 4
Published operating points and test conditions from this source.
SECTION 1
Beam Power
Characteristic
Grid 1 to plate capacitance
1.45 pF
WholeTube
Input capacitance
8.5 pF
WholeTube
Output capacitance
5.3 pF
WholeTube
Other
Maximum plate voltage
275 V
WholeTube
Maximum grid 2 voltage
275 V
WholeTube
Maximum plate dissipation
12.5 W
WholeTube
Maximum grid 2 dissipation
2 W
WholeTube
Maximum cathode current
75 mA
WholeTube
Maximum heater-cathode voltage
450 V
WholeTube
Plate voltage
250 V
TypicalOperation
Grid 2 voltage
250 V
TypicalOperation
Grid 1 voltage
-12.5 V
TypicalOperation
Plate current
45 mA
TypicalOperation
Grid 2 current
3.5 mA
TypicalOperation
Transconductance
4100 uS
TypicalOperation
Grid 1 signal voltage
8.8 Vrms
TypicalOperation
Load resistance
5000 ohm
TypicalOperation
Power output
4.5 W
TypicalOperation
Data set 03
196X Bendix
Published operating points and test conditions from this source.
SECTION 1
Beam Power
Other
Heater Voltage
9 V
Published datasheet value; see source context.
Plate Voltage
300 V
Published datasheet value; see source context.
Cathode Current
80000 mA
Published datasheet value; see source context.
Characteristic
Heater Current
600 mA
Published datasheet value; see source context.
Plate Current
0.6 mA
Published datasheet value; see source context.
Transconductance
5200 µS
Published datasheet value; see source context.