Skip to main content
Tube Tinker — Electron Tube Database
Alternatives & variationsDownload PDF datasheet

Power - Pentode (NOT beam) ·Pentode

6092

Directly heated subminiature power pentode designed for portable, wearable, or low-battery-drain output-amplifier service.

Directly heatedCold cathodeCommon cathodeDissimilar
Sections
1
Base
-
Socket code
-
Base pins
-
Nominal heater
1.25 V / 50 mA

Description

Directly heated subminiature power amplifier pentode for wearable and portable equipment.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
-
Socket code
-
Base pins
-
Nominal heater voltage
1.25 V
Nominal heater current
50 mA
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Pentode

X-ray radiationInterelectrode capacitances
Transconductance
0.0006 S
Max plate voltage
67.5 V
Max screen voltage
67.5 V
Max cathode current
3.5 mA

Published ratings and characteristics promoted where clearly stated; identical repeated sections compressed where applicable.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1938 Raytheon

Published operating points and test conditions from this source.

SECTION 1

Pentode

Characteristics

  • Heater or filament voltage

    1.25 V

    Published nominal value

  • Heater or filament current

    50 mA

    Published nominal or representative value

  • Transconductance

    600 µS

    Published characteristic